This lift spacer kit is designed to alleviate rear end sag on the 17-24 Subaru Impreza that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Impreza is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our Subaru lift kit increases ground clearance, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your lifted Subaru will have the ability to traverse inclement terrain with ease.
Our complete bolt-on spacer lift kit can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each coil spring spacer kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK strut spacer kits omit the need for dangerous strut disassembly. RalliTEK lift kits are engineered and manufactured in the USA and are backed by a lifetime warranty.
Front lift height: 2”
Front lift height: 2-1/2”
Built-in caster and camber correction
Retains factory alignment specifications
Retains factory suspension geometry
3/16” MIG Welded Steel Construction
Hammered Blue Powder Coat
Bolt-on design, no drilling or cutting required
Increased ground clearance
Ability to fit larger off-road tires
Manufactured in the USA
Lifetime warranty
All Hardware Included
Want an even better ride? Pair our front lift spacers with our springs for even better handling and off-road capability.
Give us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.
*Product Disclaimer:
The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, add-ons, or additional modifications.
This is an off-road component. Slight clicking or noise is to be expected due to small amounts of play at the locking pin which is required for removal and reconnection of the end link. We have found it to be a minor noise that can only be heard with the radio off and intentionally listening for it. If small noises bother you, then DO NOT purchase this product.
Collapsible content
What's in the Box
2 - Rallitek front spacer
2 - RalliTEK rear spacer
4 - RalliTEK subframe drop spacers
2 - RalliTEK brake line bracket
1 - Hardware kit
x2 RalliTEK Adjustable Swaybar Endlinks
If Selected:
x2 Swaybar Quick Disconnects
x2 Swaybar Disconnect Strap System
x2 Swaybar Disconnect Strap Mount
Warranty Information
RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY
RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.
If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.
No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.
For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to theRalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.
NOTE: This warranty is only available within the United States or Canada
This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.
The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.
Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only.RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.
There is no warranty on high-performance or race-related parts due to the nature of usage.
No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.
EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.
I probably should have gone with 2" F & 2" R kit as it sits a little funny higher in the back. I was anticipating more squat when loaded but apparently what goes in the back isn't as heavy as I thought. Otherwise, it fits great and is well designed.
Hello Ryan,
Please send me an email to info@rallitek.com and we can talk about some options to get you in a better spot with heights. Most do not need the 2' front and 2.5' rear lift kit unless they have a decent amount of constant weight on the vehicle.
K
KAITLYN A.H.
Love it!
I was worried because the garage had past Impreza customers who weren’t satisfied. My guess is they weren’t using this kit that is made for Impreza. I don’t go off road, I really wanted a little bit more ground clearance and this was a perfect match. I definitely recommend this kit for Imprezas that want a little more clearance.
k
kenneth c.
Lift kit
The lift was perfect to get my impreza hatch off the ground and now everyone thinks it’s a crosstrek. Good quality product. Would help with better instructions but love the kit
M
Michael K.
2017 impreza sedan lift
Nice kit. My mechanic billed me 3 1/2 hrs. labor for install and thought it fit well. Made quite a difference. My bike rack no longer hits leaving parking lots. Can't wait for winter snow driving!