Categories

per page
Showing 1 - 20 of 398 items
  • Quick view
    $94.50 $189.00 -50%

    SPECIAL CLEARANCE PRODUCT This product has been superseded by a newer design but while supplies last, this particular model is available at a discounted price. *It is recommended that a 2” hole be drilled in the center of the spacer. SPECIFICATIONS:3/16” MIG Welded Steel Construction Hammered Blue...

    $94.50 $189.00 -50%
    Reduced price!
  • This is the bolt used RalliTEK spacer and Lift kits. M14 X 1.5 X 200mm Gr 10.9 65mm THREAD LENGTH *Sold as a 4 piece set of bolts. *This is a Universal Part.

    $20.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes:2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $57.75
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Necessary Hardware Included Easy Install with Clocked Mounting Holes, No Need to Remove Factory Studs!

    $189.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $189.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Spacers Hammered Blue Powdercoat All Hardware Included

    $219.45
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat or Black with silver flakes All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $189.00
  • These are our most aggressive rear lift spacers intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough. An alignment is required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a...

    $189.00
  • Ditch your old light setup for our new RalliTEK Ditch Light Mounts!   Mounts to Hood Brackets Using Existing Hardware Gusseted For Extra Rigidity  Powder Coated For Excellent Corrosion Resistance 1/8" Thick Laser Cut Steel Wire Retainer and Clips Included  2x2 Light Pod Recommended Installation Instructions Found Under...

    $108.10
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $36.74
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $31.49
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!   Works with both the NA and XT models.Hardware included. Bolt-on Install. Install instructions are found under the download tab. 1/8"...

    $334.95
  • NOTE: Joint needs to be greased with a grease gun upon installation. Off-Road tested and approved; these have been put through the paces and keep coming back for more! RalliTEK designed these direct replacement rear HD Adjustable Toe Arms to work with stock, lifted, and lowered applications.    Features:Polyurethane Bushing w/ Steel...

    $208.95
  • DIY RALLITEK INTAKE (non-turbo Subaru) Our RalliTEK Intake Piping is metallic, form-factored piping with anodic protection coating to seal and protect against corrosive elements. This intake pipe is compatible with most Subaru non-turbo models. This intake piping is the perfect solution for any DIY piping project!

    $49.00
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to...

    $618.45
  • RalliTEK designed these direct replacement extended/adjustable front HD end links specifically for lifted applications. Featuring an anodized aluminum turnbuckle with lock nuts for easy length adjustment. Our HD end links help reduce suspension slop and increase side-to-side response. These are compatible with factory or aftermarket sway bars....

    $129.00
  • 1 Review(s)

    RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty...

    $1,048.95
  • Are you looking to gain a little more down travel out of your rear struts? RalliTEK has the answer with our new multi-link rear strut shaft extension! These extensions will allow for an extra inch of down travel in the rear struts and they are perfect to pair with any lifted RalliTEK rear springs!   ***ONLY FOR USE ON 1" LIFT SPRINGS ***...

    $72.45
  • Our RalliTEK Subframe Drop Spacer Kit will allow for rear camber and toe correction while also centering the rear tire in the wheel opening when lifting your car beyond 1.5 inches.  Anodized Blue Aluminum Spacers Fixes Rear Camber and Toe Helps Re-Center the Rear Tires in the Wheel Well Includes Brake Line Extension Brackets All Hardware Included  

    $261.45
Showing 1 - 20 of 398 items