RalliTEK 1" Rear Raised Springs - Forester 2003-2008

RTEK-830-723-220

New

RalliTEK

Forester Lift Kit


  • Ride Height: +1" LIFT*
  • Spring Rate: 220 lb/in
  • 18-20% stiffer than OEM
  • Fits with OEM and KYB struts
  • Increases street stability and towing capacity
  • Increases off-road articulation

PRICE IS PER PAIR OF SPRINGS.

 

*Product Disclaimer:

 

The advertized ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, addons, or additional modifications.


More details

$220.00

If you take your forester off-road like we do, having an extra inch of ground clearance can be the difference between getting stuck on a log or being able to get out of a deep rut in the road. RalliTEK designed these springs for that extra inch of ground clearance. The spring rates are still very reasonable for the street and can be driven with a swaybar on the street and without on the trails for the maximum amount of suspension articulation. 

 

These springs also work well for off-roading setups where a few hundred pounds of equipment and gear are along for the ride. A Curt roof basket with 2 extensions and ARB awning is installed on the lifted RalliTEK Forester. We pull a trailer with a Curt hitch to our track racing events and off-road rally events. These springs take it like a champ. The extra lift makes it easy to fit 235/70R15 off-road tires as well.

 

 

More about RalliTEK:

RalliTEK’s purpose for their springs is to provide an everyday solution for individuals who commute daily with their vehicle, but also enjoy adventures up to the mountain or country trail for winter sports or summer shenanigans. Springs that would not only solve relevant issues, but also improve the vehicle’s ability to perform in different climates around North America.

 

RalliTEK springs are designed, built, tested, and supported in Portland, Oregon, USA. A place known for it's varying climates and terrain. RalliTEK's springs come with guarantees of satisfaction, manufacture warranties, and faster customer support than other off-road spring brands on the market.


RalliTEK springs are made from chrome silicon spring steel. Chrome silicon spring steel is awesome for conditions involving high stress and for applications where shock or impact loading occurs. Chrome silicon wire can withstand higher and lower temperatures than high-carbon steel wire which makes it an obvious choice for RalliTEK users that make regular mountain trips in the snow and to Mordor. These springs make street driving more fun when unloaded due to the increase in spring rate. Riding on the trail when loaded with RalliTEK springs makes steering response and tracking much more predictable than with the same weight on factory springs. 


 


What is the difference between King and RalliTEK springs?

Grade 
Steven c 11/03/2016

Great, now I can haul more gear!

Installed these on a 2001 forester with rear shocks from a 2003-2005.

My previous issue was too much sagging with a roof rack, hitch, and 3 bikes on a hitch rack. This would make almost no wheel gap in the rear.

After adding these springs, it lift what seems like two inches. I presume it's due to the increased spring rate which brough it back to stock height and then the additional 1" inch over stock. Overall these are great and will allow me to carry a much greater load with more stability.

Any higher than this and you should think about rear trailing arm spacers. Camber bolts will be necessary for the rear with these.

Write a review

RalliTEK 1" Rear Raised Springs - Forester 2003-2008

RalliTEK 1" Rear Raised Springs - Forester 2003-2008

Forester Lift Kit


  • Ride Height: +1" LIFT*
  • Spring Rate: 220 lb/in
  • 18-20% stiffer than OEM
  • Fits with OEM and KYB struts
  • Increases street stability and towing capacity
  • Increases off-road articulation

PRICE IS PER PAIR OF SPRINGS.

 

*Product Disclaimer:

 

The advertized ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, addons, or additional modifications.


Write a review