Categories

per page
Showing 1 - 20 of 304 items
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • These overload springs are designed to help eliminate the "sagginess" out of the rear of the Crosstrek XV. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation. Ride Height: +0.5" LIFT* Spring Rate: 265 lb/in 25-30% stiffer than OEM...

    $220.00
  • These overload springs are designed to help eliminate the "sagginess" out of the rear of the Crosstrek XV. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation. Ride Height: +0.5" LIFT* Spring Rate: 265 lb/in 25-30% stiffer than OEM...

    $220.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Necessary Hardware Included Easy Install with Clocked Mounting Holes, No Need to Remove Factory Studs!

    $180.00
  • Crosstrek Lift Kit   RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +1" LIFT* Spring Rate: 180...

    $220.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • Crosstrek Lift Kit   RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +1" LIFT* Spring Rate: 220...

    $220.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Spacers Hammered Blue Powdercoat All Hardware Included

    $199.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $180.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Spacers Hammered Blue Powdercoat All Hardware Included

    $209.00
  • THIS PRODUCT IS CURRENTLY ON BACKORDER: (Please contact us for more details)3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Front Spacers Hammered Blue Powdercoat Multi-Link (Rear Subframe) Spacers Included Extended Exhaust Hangers Included All Hardware IncludedPLEASE NOTE: Some cars did not come with a factory rear...

    $629.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $180.00
  • RalliTEK is proud to offer a high quality affordable EGT gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK EGT gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle.

    $39.95
  • 1 Review(s)

    RalliTEK is proud to offer a high quality affordable Oil Pressure gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK Oil Pressure gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle. DISCONTINUED

    $34.95
  • Wanting a little more camber adjustability in the rear suspension? Looking for a stronger than OEM control arm? RalliTEK has the solution for you with their innovative Adjustable Rear Control Arm! These control arms are made out of 3/16" steel that has been MIG welded and powder coated for high strength and excellent corrosion resistance and can be...

    $549.00
  • Ditch your old light setup for our new RalliTEK Ditch Light Mounts!  Mounts to Hood Brackets Using Existing Hardware Gusseted For Extra Rigidity  Powder Coated For Excellent Corrosion Resistance 1/8" Thick Laser Cut Steel Wire Retainer and Clips Included  2x2 Light Pod Recommended Installation Instructions Found...

    $79.95
  • RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +0.5" LIFT* Spring Rate: 180 lb/in 18-20% stiffer...

    $220.00
  • RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +0.5" LIFT* Spring Rate: 180 lb/in 18-20% stiffer...

    $220.00
  • RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +0.5" LIFT* Spring Rate: 220 lb/in 18-20% stiffer...

    $220.00
  • RalliTEK springs for the Subaru Crosstrek XV feature an increased spring rate which allow you to maintain your ride height with all your gear and any other mounted accessories you have bolted on. These springs are made in the USA and are powder coated for long term corrosion resistance.  Ride Height: +0.5" LIFT* Spring Rate: 220 lb/in 18-20% stiffer...

    $220.00
Showing 1 - 20 of 304 items