Categories

per page
Showing 1 - 20 of 323 items
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes:2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Necessary Hardware Included Easy Install with Clocked Mounting Holes, No Need to Remove Factory Studs!

    $180.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Spacers Hammered Blue Powdercoat All Hardware Included

    $199.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Front Spacers Hammered Blue Powdercoat Multi-Link (Rear Subframe) Spacers Included Extended Exhaust Hangers Included All Hardware Included  PLEASE NOTE: Some cars did not come with a factory rear swaybar, make sure to select the right kit for your vehicle

    $589.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $180.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Spacers Hammered Blue Powdercoat All Hardware Included

    $209.00
  • 3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Front Spacers Hammered Blue Powdercoat Multi-Link (Rear Subframe) Spacers Included All Hardware Included Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment Extended Exhaust Hangers Included  PLEASE NOTE: Some cars did...

    $629.00
  • Limited Run, Available While Supplies Last!   3/16” MIG Welded Steel Construction Alignment Corrections Designed Into the Front Spacers Hammered Black Powdercoat Multi-Link (Rear Subframe) Spacers Included All Hardware Included Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment Extended Exhaust...

    $629.00
  • 3/16” MIG Welded Steel Construction Hammered Blue Powdercoat or Black with silver flakes All Hardware Included DOES NOT INCLUDE SUBFRAME DROP SPACER KIT

    $180.00
  • RalliTEK is proud to offer a high quality affordable EGT gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK EGT gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle.

    $39.95
  • 1 Review(s)

    RalliTEK is proud to offer a high quality affordable Oil Pressure gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK Oil Pressure gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle. DISCONTINUED

    $34.95
  • 2 Review(s)

    Wanting a little more camber adjustability in the rear suspension? Looking for a stronger than OEM control arm? RalliTEK has the solution for you with its innovative Adjustable Rear Control Arm! These control arms are made out of 3/16" steel that has been MIG welded and powder coated for high strength and excellent corrosion resistance and can be...

    $549.00
  • Ditch your old light setup for our new RalliTEK Ditch Light Mounts!   Mounts to Hood Brackets Using Existing Hardware Gusseted For Extra Rigidity  Powder Coated For Excellent Corrosion Resistance 1/8" Thick Laser Cut Steel Wire Retainer and Clips Included  2x2 Light Pod Recommended Installation Instructions Found Under Download TabSOLD AS A PAIR

    $99.95
  • Complete your underbody protection with RalliTEK's transmission skid plate! This kit includes RTEK-100093 & RTEK-100094.Hardware included. Bolt-on Install. Install instructions found under the download tab. 1/8" thick laser-cut aluminum plate. Uses 4 M8 RalliTEK Dome Washers Uses 2 M10 RalliTEK Dome WashersSkid plate may touch...

    $579.00
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!Hardware included. Bolt on Install. Install instructions found under download tab. 1/8" thick laser-cut aluminum plate. Uses 4 M8 RalliTEK Dome...

    $319.00
  • Ride Height:  Estimated +0.5" LIFT* Spring Rate: 190 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performance Includes 2 RalliTEK isolatorsPRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertised ride height...

    $220.00
  • Quick view
    $424.15 $499.00 -15%
    Sale!

    RalliTEK is taking pre-orders on these parts at this time, ETA for production components is end of May. Act now to save 15% and to get them before your friends!   Tired of mangling your OEM trailing arms when you are on the trail? Look no further as RalliTEK has the solution for you! Our Heavy Duty Adjustable Trailing Arms are built to stand up to...

    $424.15 $499.00 -15%
  • Ride Height: +0.5" LIFT* Spring Rate: 355 lb/in 20-25% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS.   PAIRING OEM HEIGHT RALLITEK SPRINGS WITH A 1" SPACER MAY REQUIRE THE USE OF ADDITIONAL ALIGNMENT CORRECTION COMPONENTS,...

    $220.00
  • Ride Height: +0.5" LIFT* Spring Rate: 290 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS.   PAIRING STANDARD HEIGHT RALLITEK SPRINGS WITH A 1" SPACER MAY REQUIRE THE USE OF ADDITIONAL ALIGNMENT CORRECTION COMPONENTS, WE RECOMMEND THE SPC...

    $220.00
Showing 1 - 20 of 323 items