No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Categories
-
Your Adventure Starts Here
- Air Induction
- Exhaust
- Forced Induction
-
Engine
- Engine Dress Up (0)
- Oil Systems (0)
- Belts (12)
- Pulleys (12)
- Oil Drain Plugs (4)
- Ignition System (4)
- Bolts, Studs, & Fasteners (6)
- Forged Pistons (13)
- Block Off Plates (1)
- Connecting Rods (8)
- Main/Rod Bearings (1)
- Camshafts (2)
- Valves (13)
- Gaskets (41)
- Stroker Kits (4)
- Tensioners & Idlers (9)
- Valve Springs & Retainers (13)
- Valve Stems (2)
- Valve Guides (6)
- Seals (10)
- Water Pumps (2)
- Engine Mount (8)
- Brakes
-
Suspension
- Lift Springs & Lift Kits (60)
- Assembled Strut Kits (62)
- Lift Spacers (21)
- OE Height Springs (57)
- Struts (93)
- Top Hats & Mounts (17)
- Endlinks (38)
- Lateral Links (20)
- Camber Bolts (7)
- Lowering Springs (100)
- Coilovers (42)
- Sway Bars (85)
- Strut Tower Bars (43)
- Chassis Bracing (54)
- Bushings (67)
- Ball Joints (3)
- Caster Adjustment (15)
- Subframe Lockdowns (4)
- Trailing Arms (6)
- Trailing Arm Brackets (2)
- Transmission & Drivetrain
- Cooling
- Electronics & Electrical
- Fuel Systems
- Interior Parts
-
Exterior Parts
- Light Bars & Pods (33)
- Rally Skid Plates (14)
- Rally Mud Flaps (30)
- Trailer Hitches (69)
- Front Lips & Splitters (5)
- Hoods & Hood Scoops (18)
- License Accessories (25)
- Spoiler & Wings (9)
- Diffusers & Vortex Generators (10)
- Detailing & Paint (5)
- Canards (3)
- Body Panels (1)
- Tow Hooks (17)
- Horns (8)
- Mirrors (5)
- Accessories (16)
- Bulbs & HIDS (19)
- Lubricants & Fluids
- Rally Mud Flaps
- Offroad Skid Plates
- Wheels & Tires
- Clothing & Merchandise
- Car Care & Maintenance
- Clearance Parts
- Used Parts
-
RalliTEK 0.5" Front Lift Kit Spacers - All...
These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1/2" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.
$55.00 -
RalliTEK 0.5" Rear Lift Kit Spacers - All...
These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1/2" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.
$55.00 -
RalliTEK 1" Front Lift Kit Spacers - All...
These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.
$110.00 -
RalliTEK 1" Front Raised Springs & KYB...
Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of. Ride Height: +1" LIFT* Kit Includes: KYB...
$625.00 -
RalliTEK 1" Front Raised Springs - WRX &...
1 Review(s)Ride Height: +1" LIFT* Spring Rate: 220 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road articulation PRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertized ride height specified for this product is a measurement taken from a completely stock vehicle....
$220.00 -
RalliTEK 1" Rear Lift Kit Spacers - All...
These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.
$110.00 -
RalliTEK 1" Rear Raised Springs & KYB...
Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of. Ride Height: +1" LIFT* Kit Includes: KYB...
$600.00 -
RalliTEK 1" Rear Raised Springs - WRX &...
Ride Height: +1" LIFT* Spring Rate: 195 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road articulation PRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertized ride height specified for this product is a measurement taken from a completely stock vehicle....
$220.00 -
RalliTEK 35mm Short Polyurethane Exhaust...
RalliTEK High Temp Poly Exhaust Hangers are created from the finest high temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent noise and leaks...
$9.95 -
RalliTEK 4EAT Transmission Mount Insert...
2 Review(s)RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmisson Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount. Improved shift...
$44.99 -
RalliTEK 5 Speed Shifter Bushing - WRX...
2 Review(s)RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten shifter slop. A helpful upgrade for a mushy shifter.
$35.00 -
RalliTEK 52mm Exhaust Gas Temperature Gauge
RalliTEK is proud to offer a high quality affordable EGT gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK EGT gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle.
$39.95 -
RalliTEK 52mm Oil Pressure Gauge
1 Review(s)RalliTEK is proud to offer a high quality affordable Oil Pressure gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK Oil Pressure gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle. DISCONTINUED
$34.95 -
RalliTEK 60mm Long Polyurethane Exhaust...
RalliTEK High Temp Poly Exhaust Hangers are created from the finest high temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent noise and leaks...
$13.00 -
RalliTEK Clutch Master Cylinder Brace -...
1 Review(s)This product bridges a connection from the pitch stop mount location over to the OE clutch master cylinder to eliminate movement in the clutch pedal and to provide increased pedal sensitivity and strength. The 2008-2014 Impreza models are notorious for firewall failure issues. The quantity of spot welds combined with the thickness of the sheet metal...
$134.99 -
RalliTEK Front Skid Plate - WRX 2008-2014...
2 Review(s)With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected! ***Limited edition black available while supplies last*** Hardware included. Bolt on Install. Install instructions found under download tab. 1/8"...
$289.00 -
RalliTEK HD Rear Endlinks Replacement...
This is the full replacement bushings kit for RalliTEK's rear endlinks (RTEK-113156). This kit comes with all (4) bushings and lubricant needed for the full replacement of the rear endlinks.
$48.00 -
RalliTEK Heavy Duty Front Adj. Endlinks -...
2 Review(s)RalliTEK designed these direct replacement front HD endlinks that will work with factory or aftermarket sway bars. Steel construction ensures your heavy aftermarket swaybar wont destroy your endlink. The RalliTEK endlink reduces slop in your suspension articulation. Features: 30% thicker material than factory. Outlast and out perform OEM links....
$90.00 -
RalliTEK Heavy Duty Rear Adjustable...
RalliTEK designed these direct replacement rear HD endlinks to work with factory or aftermarket sway bars. Made out of durable polyurethane bushing, and a steel shaft that was increased by 30%, the RalliTEK endlink provides less movement among the sway bar. Features: 30% thicker material than factory. Outlast and out perform OEM links. OEM replacement...
$95.00 -
RalliTEK License Plate Delete - All...
RalliTEK's License Delete covers the mounting area on your front bumper. RalliTEK Logo is laser cut from Virgin Aluminum and powder coated black. Dress up the appearance of your Subaru for shows, events, or...
$35.00
