Categories

per page
Showing 1 - 20 of 600 items
  • Ever feel the back of your Outback kick out a little over bumps? This is an issue called "Ghost Walking" that happens to the 2005-2009 Outback due to the amount of change in the rear toe that happens through the suspension travel.   Our RalliTEK "Ghost Walk Fix" strut assembly helps to eliminate this issue by utilizing the previous generation...

    $733.95
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: 0" LIFT* Kit...

    $817.95
  • Ride Height: +0" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS.   *Product Disclaimer:   The advertised ride height specified for this product is a measurement taken from a...

    $231.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn-out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +0.4" LIFT*...

    $670.95
  • These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: Estimated +0.4" LIFT* Spring Rate: 355 lb/in 40-45%...

    $231.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts. In...

    $57.75
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $57.75
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1" LIFT*...

    $817.95
  • Outback Lift KitRide Height: Estimated +1" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertised ride height...

    $231.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • 3 Review(s)

    Outback Lift Kit   These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: Estimated +1.4" LIFT* 0.4"...

    $325.50
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn-out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1.4" LIFT*...

    $807.45
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $10.45
  • 2 Review(s)

    RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten the shifter slop.      A helpful upgrade for a mushy shifter.

    $36.75
  • RalliTEK 5EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 5EAT Transmission Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.  Improved...

    $47.25
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $13.65
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $36.74
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $31.49
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!Supersedes RTEK-112991 Hardware included. Bolt-on Install. 1/8" thick laser-cut aluminum plate. Install instructions are found under the...

    $303.45
Showing 1 - 20 of 600 items