Categories

per page
Showing 1 - 20 of 372 items
  • Ever feel the back of your Outback kick out a little over bumps? This is an issue called "Ghost Walking" that happens to the 2005-2009 Outback due to the amount of change in the rear toe that happens through the suspension travel.   Our RalliTEK "Ghost Walk Fix" strut assembly helps to eliminate this issue by utilizing the previous generation...

    $733.95
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: 0" LIFT* Kit...

    $817.95
  • Ride Height: Estimated +0" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertised ride height specified for this product is a...

    $231.00
  • Ride Height: +0" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS.   *Product Disclaimer:   The advertised ride height specified for this product is a measurement taken from a...

    $231.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn-out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +0.4" LIFT*...

    $670.95
  • These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: Estimated +0.4" LIFT* Spring Rate: 355 lb/in 40-45%...

    $231.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts. In...

    $57.75
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $57.75
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1" LIFT*...

    $817.95
  • Outback Lift KitRide Height: Estimated +1" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertised ride height...

    $231.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • 3 Review(s)

    Outback Lift Kit   These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: Estimated +1.4" LIFT* 0.4"...

    $325.50
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn-out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1.4" LIFT*...

    $807.45
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $10.45
  • 2 Review(s)

    RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten the shifter slop.      A helpful upgrade for a mushy shifter.

    $36.75
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $13.65
  • 3 Review(s)

    RalliTEK designed these direct replacement front HD endlinks that will work with factory or aftermarket sway bars. Steel construction ensures your heavy aftermarket swaybar won't destroy your endlink. The RalliTEK endlink reduces slop in your suspension articulation.    Features: 30% thicker material than the factory. Outlast...

    $94.50
  • DIY RALLITEK INTAKE (non-turbo Subaru) Our RalliTEK Intake Piping is metallic, form-factored piping with anodic protection coating to seal and protect against corrosive elements. This intake pipe is compatible with most Subaru non-turbo models. This intake piping is the perfect solution for any DIY piping project!

    $49.00
  • 3 Review(s)

    Stabilize your Subaru's shifter assembly mounting base with this shifter bushing by RalliTEK.   Pairs well with:RalliTEK 5 or 6 speed shifter bushingIncludes Hardware

    $36.75
Showing 1 - 20 of 372 items