Categories

per page
Showing 1 - 20 of 372 items
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +0" LIFT* Kit Includes:KYB...

    $829.00
  • The product comes with new spring perches and rubber seats as the old one does not properly hold the spring in place! Ride Height: Estimated +0" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE...

    $330.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of. Ride Height: +0.4" LIFT* Kit Includes:KYB Rear...

    $630.00
  • These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: +0.4" LIFT* Spring Rate: 355 lb/in 18-20% stiffer than OEM Fits with OEM...

    $220.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes:  2 x 1/2" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1" LIFT* Kit Includes:KYB...

    $849.00
  • Outback Lift Kit The product comes with new spring perches and rubber seats as the old one does not properly hold the spring in place!  Ride Height: Estimated +1" LIFT* Spring Rate: 205 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS....

    $330.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +1" LIFT*...

    $630.00
  • Outback Lift Kit   These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.  Ride Height: +1" LIFT* Spring Rate: 355...

    $220.00
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $9.95
  • 2 Review(s)

    RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmission Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.  Improved...

    $44.99
  • 2 Review(s)

    RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten the shifter slop.      A helpful upgrade for a mushy shifter.

    $35.00
  • RalliTEK is proud to offer a high quality affordable EGT gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK EGT gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle.

    $39.95
  • 1 Review(s)

    RalliTEK is proud to offer a high quality affordable Oil Pressure gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK Oil Pressure gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle. DISCONTINUED

    $34.95
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $13.00
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!Hardware included. Bolt-on Install. Install instructions found under the download tab. 1/8" thick laser-cut aluminum plate. Uses 4 M8 RalliTEK Dome...

    $289.00
  • 3 Review(s)

    Stabilize your Subaru's shifter assembly mounting base with this shifter bushing by RalliTEK.   Pairs well with:RalliTEK 5 or 6 speed shifter bushingIncludes Hardware

    $35.00
Showing 1 - 20 of 372 items