Categories

per page
Showing 1 - 20 of 539 items
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot-swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn-out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of. Ride Height: 0" LIFT* Kit Includes:...

    $712.95
  • These overload springs are designed to help eliminate the "sagginess" out of the rear of the Baja. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation.Ride Height: +0" LIFT* Spring Rate: 355 lb/in 40-45% stiffer than OEM Fits with OEM and KYB...

    $231.00
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap. Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $57.75
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1/2" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $57.75
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $115.50
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $10.45
  • 2 Review(s)

    RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmission Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.  Improved...

    $47.25
  • 2 Review(s)

    RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten the shifter slop.      A helpful upgrade for a mushy shifter.

    $36.75
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high-temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent...

    $13.65
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $36.74
  • 1 Review(s)

    Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process.    Made out of 6061 Aircraft Aluminum...

    $31.49
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!Hardware included. Bolt-on Install. Install instructions are found under the download tab. 1/8" thick laser-cut aluminum plate. Uses 4 M8 RalliTEK...

    $303.45
  • 3 Review(s)

    Stabilize your Subaru's shifter assembly mounting base with this shifter bushing by RalliTEK.   Pairs well with:RalliTEK 5 or 6 speed shifter bushingIncludes Hardware

    $36.75
  • Included with the RTEK-109720 RalliTEK skid plate.  This is in case you lost yours or they need replacing.

    $15.00
  • Are you looking to gain a little more down travel out of your rear struts? RalliTEK has the answer with our new multi-link rear strut shaft extension! These extensions will allow for an extra inch of down travel in the rear struts and they are perfect to pair with any lifted RalliTEK rear springs!   ***NOT FOR USE WITH LIFT SPRINGS UNDER 0.75" ***...

    $72.45
  • Help keep your intake manifold cool by insulating it from the heat produced by your engine with these 3.2mm phenolic spacers. Fits all EJ20 & EJ25 Turbo engines. Sold as a pair.

    $49.95
  • The Yokohama Advan Racing Silver Center Caps have been designed for Advan Wheels and are perfect to complete an aggressive appearance for the street. Suitable for Advan Racing wheels RZ, RG II, RS, TC II, RC II and the Super Advan Racing Version 2.

    $56.00
  • The Yokohama Advan Racing Black Center Caps have been designed for Advan Wheels and are perfect to complete an aggressive appearance for the street.  Suitable for Advan Racing wheels RZ, RG II, RS, TC II, RC II and the Super Advan Racing Version 2.  Note that smaller PCD such as 112, 100 and 98 will require the 63mm version and larger PCD such as 120 or...

    $56.00
  • AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for engines up to 1000 horsepower. Their patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. This universal fuel pressure regulator is tapped to accept a -6 AN, or 9/16”x18 fittings and includes a 1/8...

    $129.98
Showing 1 - 20 of 539 items