Categories

per page
Showing 1 - 20 of 447 items
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +0" LIFT* Kit Includes:KYB...

    $789.00
  • Ride Height: +0" LIFT* Spring Rate: 215 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability Increases off-road performancePRICE IS PER PAIR OF SPRINGS.   *Product Disclaimer:   The advertized ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height...

    $220.00
  • Product comes with new KYB top hats as the old one does not properly hold the spring in place! Ride Height: +0" LIFT* Spring Rate: 220 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. ...

    $329.00
  • Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts for a pre-assembled kit by RalliTEK! Whether you have worn out struts and springs, or you just don't want to deal with a spring compressor, put RalliTEK on your team and know that you'll be taken care of.   Ride Height: +0" LIFT* Kit Includes:KYB...

    $689.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes:  2 x 1/2" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes:  2 x 1/2" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $55.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes:  2 x 1" Spacers & hardware. New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • Forester Lift Kit Ride Height: +1" LIFT* Spring Rate: 215 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. *Product Disclaimer: The advertized ride height specified for...

    $220.00
  • These HDPE (High density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.   Includes: 2 x 1" Spacers & hardware.New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

    $110.00
  • Product comes with new KYB top hats as the old one does not properly hold the spring in place! Ride Height: +1" LIFT* Spring Rate: 220 lb/in 18-20% stiffer than OEM Fits with OEM and KYB struts Increases street stability and towing capacity Increases off-road performancePRICE IS PER PAIR OF SPRINGS. ...

    $329.00
  • This kit uses 08 Forester XT struts which provide a 1/2" lift over OEM as well as a larger strut shaft for more durability. Paired with our 1" RalliTEK Forester spring, you end up with a healthy and functional 1.5" lift. That's all extra ground clearance! Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old...

    $829.00
  • This kit uses 08 Forester XT struts which provide a 1/2" lift over OEM as well as a larger strut shaft for more durability. Paired with our 1" RalliTEK Forester spring, you end up with a healthy and functional 1.5" lift. That's all extra ground clearance! Ever watch a NASCAR pit crew change a tire? This is how you'll feel when you hot swap your old struts...

    $787.50
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent noise and leaks...

    $9.95
  • 2 Review(s)

    RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmisson Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.  Improved shift feel...

    $44.99
  • 2 Review(s)

    RallITEK Subaru 5 Speed Shifter Bushing is made of durable polyurethane and replaces the factory soft rubber bushing in your shift linkage to tighten shifter slop.      A helpful upgrade for a mushy shifter.

    $35.00
  • RalliTEK is proud to offer a high quality affordable EGT gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK EGT gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle.

    $39.95
  • 1 Review(s)

    RalliTEK is proud to offer a high quality affordable Oil Pressure gauge. RalliTEK gauges are 52mm in diameter to fit aftermarket gauge pods. RalliTEK Oil Pressure gauges are offered in two different styles backlit with either red lettering and a white needle, or white lettering with a red needle. DISCONTINUED

    $34.95
  • RalliTEK High Temp Poly Exhaust Hangers are created from the finest high temperature polyurethane for the durability and look you deserve. Replace those old worn out exhaust hanger bushings with RalliTEK Performance Exhaust Hangers. Factory rubber hangers can allow movement that your larger aftermarket exhaust can not tolerate. Prevent noise and leaks...

    $13.00
  • Tired of your wheels being moved forward when you lift your Subaru? RalliTEK's new Adjustable Trailing Arm Brackets will allow you to re-center your rear wheels without the need for a spacer and are a direct OEM replacement. They can accommodate OEM height all the way up to a 2" lift and can be fine tuned to your specifications. Features:...

    $229.00
  • Allows for the use of the factory 2004-2007 STI rear Brembo calipers. Kit includes 2 rear caliper brackets and mounting hardware. For use with conversion rotors from DBA only. Available in DBA 4000 t-slot and DBA 4000 XS cross-drilled and slotted. Contact RalliTEK for more information.   Made from billet 6061 aluminum locally in Portland, Oregon!...

    $210.00
Showing 1 - 20 of 447 items