Perrin Engine Mount Kit - WRX 2015-2016 / BRZ 2013-2017 / FR-S 2013-2016
NOTE: This product number has been discontinued by the manufacturer.
PERRIN Performance engine mount kits reduce drivetrain movement under hard acceleration, deceleration, and corning. Allowing the most efficient transmission of all available power to the ground. This means easier transitions from on and off throttle power in daily driving, more accurate launches during drag racing, and autocross-type events where you do not want drivetrain slop. PERRIN engine mount kits also improve reliability, as they can not tear apart like OEM mounts leading to other drivetrain-related failures.
The PERRIN Performance engine mount kit featuring Energy Suspension mounts with a patented Interlock design. Unlike OEM and Group N mounts, the unique shape of Energy Suspension's steel internals keeps the mount from physically tearing apart. Small oil leaks or highly corrosive atmospheric conditions combined with extreme temperature changes will make OEM and Group N rubber mounts brittle and lead to failure. The PERRIN Performance engine mount kit with Energy Suspension mounts features 75A durometer polyurethane that is impervious to oils and other chemicals, easily outlasting the OEM mounts.
The PERRIN engine mount kit includes upper engine mounts and lower mounting brackets with heat shields. Most replacement mounts reuse the heavy OEM steel bracket, but PERRIN mounts are CNC'ed 6061-T6 aluminum brackets, making a stronger mounting surface for the stiff urethane mounts. The PERRIN engine mount kit is ideal for those with OEM plastic type mounts as you will not need to buy additional parts to replace faulty or cracked plastic brackets.
PERRIN engine mount kits are stiffer than stock, which adds some NVH (noise, vibration, harshness). The polyurethane compound provides enough vibration absorption for daily driving, yet strong enough to enhance driver perception with the added feeling of your engine solidly connected to the chassis, versus having that sloppy disconnected feel.
OEM and aftermarket mounts use a stud and nut to secure the engine to the chassis. Making removing and installing the engine into the car somewhat tricky. The PERRIN Mounts use a bolt in place of the stud which means you do not have to lift the engine up past the studs or get the mounts perfectly aligned to the transmission and subframe when installing the engine. This small detail was done specifically for the customer who is constantly pulling the engine out to add new parts, rebuild, change the clutch, or any other big engine upgrade. Another PERRIN advantage!
No customer comments for the moment.