Rally Skid Plates

With an Offroad Subaru skid plate by RalliTEK, you can protect yourself in almost any condition. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

Rally Skid Plates

With an Offroad Subaru skid plate by RalliTEK, you can protect yourself in almost any condition. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

Showing 1 - 20 of 20 items
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 5/32" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Supersedes RTEK-112991
    • Hardware included. Bolt-on Install.
    • 1/8" thick laser-cut aluminum plate.
    • Install instructions are found under the download tab.
    • Uses 1 set of M8 RalliTEK Dome Washers
    • THIS SKID PLATE WILL CLEAR KILLER B OIL PANS

    NOTE: Oil Drain Cut-out doesn't fit 2005 Outback 2.5 L or 2005 Legacy 2.5 L / Legacy GT.

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • New redesign to work with 2.5i AND 3.6R models
    • Hardware included. Bolt-on Install.
    • Available with or without access panels
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers
    • Use the drop-down to purchase the skid plate with or without the access panels

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers
    • THIS SKID PLATE WILL CLEAR KILLER B OIL PANS
    • MAY REQUIRE ADDITIONAL SPACING OF THE SKID PLATE TO CLEAR AFTERMARKET HEADERS


    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! This transmission skid plate MUST be used with RalliTEK's front-engine skid plate. This kit includes RTEK-100073 & RTEK-100100.

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    Use the drop-down to purchase the engine skid plate with or without the access panels 

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! This transmission skid plate MUST be used with RalliTEK's front-engine skid plate.

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.

    MUST BE USED WITH ENGINE SKID PLATE.

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! 

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 1 set of M10 RalliTEK Dome Washers

    *Skid plate may touch exhaust if longer exhaust hangers are installed

    *Fits Auto & Manual Transmission

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! This kit includes RTEK-100093 & RTEK-100094.

    Skid plate may touch exhaust if longer exhaust hangers are installed.

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! 

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 1 set of M8 RalliTEK Dome Washers

    MUST BE USED WITH ENGINE SKID PLATE.

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Complete your underbody protection with RalliTEK's transmission skid plate! This kit includes RTEK-100281 & RTEK-100282.

    • Hardware included 
    • Bolt-on Install
    • Install instructions are found under the download tab
    • 5/32" thick laser-cut aluminum plate
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • With a RalliTEK skid plate for your Subaru, you can protect yourself like a WRC champion. No more cringing while driving over hazards, just smile and know the underside of your Subaru is protected!

     

    Works with both the NA and XT models.

    • Hardware included. Bolt-on Install.
    • Install instructions are found under the download tab.
    • 1/8" thick laser-cut aluminum plate.
    • Uses 2 sets of M8 RalliTEK Dome Washers

     ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $49.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
  • Drive your Forester with confidence on or off-road with RalliTEK’s engine skid plate. A fun adventure can turn into an expensive and frustrating experience in the blink of an eye if a rock damages your oil pan. Even if an obstacle only dents your pan, it can damage the oil pickup which can ultimately lead to catastrophic engine failure. Constructed from 1/8” aluminum, this skid plate will protect your engine from rouge rocks on the trails as well as unexpected debris on the highway.

    • Constructed from laser-cut 1/8” aluminum plate
    • Hardware included – Bolt-on install
    • Trail tested by RalliTEK experts
    • Helps promote airflow through the radiator
    • Engine skid plate includes mounting points for transmission skid plate – sold separately
    • Designed and manufactured in the United States
    • Can be combined with RalliTEK M8 dome washers to protect mounting hardware *insert link to RTEK-100284*


    Have you ever cringed as you drove over a hazard because there was no warning or little option? Road debris can cause expensive damage to the oil pan and other engine components as these parts, made from soft sheet metal can easily be punctured, causing oil loss and engine damage. A RalliTEK skid plate provides vehicles with an extra layer of protection, effectively shielding vulnerable engine components and oil pans from harm.


    Whenever a factory plastic front plate is damaged or missing, the air is likely, not directed throughout your radiator. Fuel efficiency and mileage, unfortunately, would be compromised. A RalliTEK aluminum skid plate will significantly help to retain factory airflow characteristics maintaining mileage, engine temperature, and airflow. All RalliTEK skid plates are thoughtfully engineered and carefully battle-proven to protect your vehicles' vitals. This item offers low-cost insurance for anyone who may be concerned about the ride height or while making an unexpected detour off-road.


    RalliTEK skid plates are manufactured using the finest light-weight aluminum alloys and precision laser-cut technology for a superior fit and shape. RalliTEK skid plates are designed with a careful balance of light-weight design while remaining resistant to punctures and impacts. All of our RalliTEK Skid plates employ factory existing mounting points for quick and effortless installation or removal. The installation process is carefully elaborated and requires only basic hand tools and a few minutes of your time.


    Our RalliTEK skid plates are proudly built and tested in the USA!

    Subaru
  • Complete your Forester’s underbody protection with the RalliTEK transmission skid plate. A fun adventure can turn into an expensive and frustrating experience in the blink of an eye if a rock damages your transmission. Even if an obstacle only dents your transmission pan, it can damage the filter or valve body which can ultimately lead to severe damage. Constructed from 1/8” aluminum, this skid plate will protect your transmission from rouge rocks on the trails as well as unexpected debris on the highway.

    • Constructed from laser-cut 1/8” aluminum plate
    • Hardware included – Bolt-on install
    • Trail tested by RalliTEK experts
    • Mounts to the RalliTEK engine skid plate – sold separately
    • Designed and manufactured in the United States


    All RalliTEK skid plates are thoughtfully engineered and carefully battle-proven to protect your vehicle. This item offers low-cost insurance for anyone who may be concerned about the ride height or while making an unexpected detour off-road.


    RalliTEK skid plates are manufactured using the finest light-weight aluminum alloys and precision laser-cut technology for a superior fit and shape. RalliTEK skid plates are designed with a careful balance of light-weight design while remaining resistant to punctures and impacts. All of our RalliTEK Skid plates employ factory existing mounting points for quick and effortless installation or removal. The installation process is carefully elaborated and requires only basic hand tools and a few minutes of your time.

    Subaru
  • Reduced price!

    The RalliTEK Differential Skid Plate will protect your rear diff from hazards off-road such as rough rocks and trail debris. The skid plate is made from 3/16” aluminum for outstanding strength while minimizing weight. Our skid plate is designed to allow for easy fluid changes without the need for removal. The angled front and side lips prevent the plate from getting caught on rocks or other obstacles. The driver’s side of the skid plate is designed for maximum exhaust clearance.


    **BEFORE ORDERING**

    You must verify if you have a 1 bolt or 5 bolt R160 differential and stamped steel front differential support as shown below. After verifying please select the style R160 differential you have from the dropdown menu. This skid plate WILL NOT work with STI R180 differentials or cars with a cast aluminum differential support.


    Features:

    • Protects your rear differential from rocks and dangerous debris
    • Made from strong and lightweight 3/16” Aluminum
    • Provisions to allow for easy fluid changes
    • Provides an easy rear jack point
    • Angled front and side lips to prevent getting caught on obstacles
    • Easy installation with zinc-coated, rust-resistant hardware

    Subaru
    $149.00 $179.00
Showing 1 - 20 of 20 items