Exhaust Systems

Release the sounds of your boxer engine! Replace your stock exhaust system to one of our aftermarket performance systems for upgraded exhaust flow, and noise.

Exhaust Systems

Release the sounds of your boxer engine! Replace your stock exhaust system to one of our aftermarket performance systems for upgraded exhaust flow, and noise.

Showing 1 - 20 of 63 items
  • The COBB Titanium Cat-Back Exhaust is unmatched in build quality, style, and performance. Utilizing Grade 4 titanium tubing, this cat-back offers high corrosion resistance and protection from impacts. Back purging ensures quality welds that will not fail due to contamination. The entire system uses slip-fit connections, allowing for a wide range of adjustments. A blued titanium tip adds a distinct touch and offers adjustability. Best of all, this complete system weighs in at 17.25lbs assembled, considerably lighter than the factory system as well as its stainless steel counterpart.




    WHY?

    The COBB Titanium Cat-Back Exhaust for your 2002-2007 Subaru WRX or STI offers premium styling and quality. Other titanium cat-backs can produce a certain 'tinny' exhaust note, however, the build quality of this system provides a refined note more akin to traditional COBB Cat-Back Exhaust Systems.




    FEATURES:

    Subaru Titanium Cat-back Exhaust WRX 2002-2007, STI 2004-2007
    • Grade 4 Titanium Construction with Back-Purged Welds
    • Lightweight - 17.25lbs Assembled
    • 4" Blued Titanium Tip with COBB Logo
    • High Adjustability via Slip-Fit Connections
    • Bespoke Straight-Through Oval Muffler

    Subaru
    $1,295.00
  • S-Type Stainless Steel Cat-Back Exhaust System with Single Rear Exit. The product is un-polished. Tip style may vary. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 2". Exhaust System Sound: Aggressive / Loud. When you want the best performing, best sounding, and highest quality exhaust system, you want Borla Exhaust. Borla straight-through mufflers and mandrel-bent exhaust tubes are custom-tuned to deliver the most horsepower possible, with a throaty, aggressive sound during acceleration and a definite performance tone at cruise. And the quality, aircraft-grade, austenitic stainless steel construction allows Borla to back every exhaust system with an unequaled million-mile warranty.


    The Borla S-Type Series Stainless Steel Cat-Back Exhaust System comes complete with everything required for installation, including detailed instructions. Borla is so confident in the quality of this system that it's guaranteed against defects in materials and workmanship for one million miles.


    SPECIFICATIONS:

    • Material: Polished T-304 Stainless Steel
    • Inlet Size (in.): 4
    • Outlet Size (in.): 4
    • Tail Pipe Diameter (in.): 2.000
    • Tubing Diameter (in.): 2.000
    • Exit Position: Rear
    • Exhaust Type: Single
    • Exit Style: Straight
    • Inlet Inside Diameter: 4.000 in.
    • Muffler Type: Turbo


    Borla is the leading manufacturer of stainless steel performance exhaust products. The company began three decades ago making exhaust systems for Concours classic Rolls Royce and Ferrari models and gradually evolved to become the premier manufacturer of performance exhaust products for street, off-road, and racing. Borla pioneered many improvements in the design of performance exhaust systems, holds several patents for innovative exhaust system technology and has won numerous "Best New Product" awards. Today the company operates a state-of-the-art research and development center in Oxnard, California, and makes all of its products at a world-class manufacturing facility in Johnson City, Tennessee.

    Subaru
  • Gemini 304 SS Cat-Back Exhaust System with Quad Rear Exit by Invidia. Exhaust System Type: Cat-Back. Exhaust Tubing Material: 304 SS. Main Tubing Diameter: 3". Exhaust System Sound: Moderate. Do you want to get more power out of your vehicle? Then this superior Invidia product is just for you. Carefully designed for maximum performance, it will more than just meet your needs and expectations. This product is built from top-grade materials to ensure high quality and provide years of reliable service.


    This Invidia product is an excellent way to experience the improvement of the performance of your vehicle. Designed with the utmost care and attention to detail, it provides unmatched durability and strength, even in extreme operating conditions. This top-notch product is made from first-rate materials to ensure a long service life. If you choose Invidia, you can stay assured that you'll get the top-quality product you can trust since Invidia does its utmost to design and manufacture only reliable parts that operate at their maximum performance level for as long as possible.

    Specifications:

    • Exhaust System Type: Cat-Back
    • Exhaust Tubing Material: 304 SS
    • Main Tubing Diameter: 3"
    • Exhaust System Sound: Moderate
    • Tip Quantity: 4
    • Tip Finish: Burnt
    • Tip Material: Stainless Steel
    • Tip Outlet Diameter: 4"
    • Tip Style: Single Layer
    • Power increase: 17hp
    • Torque Increase: 26ft-lb

    Features:

    • Made to boost the performance of your vehicle
    • Expertly crafted from premium materials
    • Quality design and workmanship
    • Durable construction for long service

    Invidia is a leading automotive manufacturer specializing in performance exhaust systems. The company's products are engineered to produce horsepower gains without sacrificing any low-end power as well as improve horsepower and torque. Invidia has a great inventory of high-grade carbon fiber products, cat-back systems, downpipes, headers, test pipes, sway bars, etc. Invidia exhaust components are crafted from quality stainless steel to provide rigidity and strength as well as ensure resistance to corrosion and serve reliably for decades to come.

    $1,193.60
  • Turbo SX Exhaust Pipe - CatBack System

    Designed specifically for each vehicle, Turbo XS Exhaust Systems are all 3", 304 Stainless Steel Steel and Titanium components are offered for certain models. Systems are designed to utilize the factory catalytic converters in stock position so as to maintain street-legal status and emissions compliance.

    NOTE: Race pipe and downpipe are included on a case-by-case basis. Please check note and confirm before ordering

    Specifications:

    • Piping:3in
    • Tip:4in
    • Tip Style: Single Polished Stainless
    • Finish: Polished Stainless Steel
    • Grade Type: Performance
    • Hangers Included: Yes
    • Mounting Bracket Included: Yes
    • (LxWxH-W): 51.8 x 22.2 x 11.1 - 35.7

    Subaru
  • Borla Cat-back TM & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere.

    2008-2011 Subaru Impreza 2.5L 4cyl AWD Auto/Manual Trans 4-Door Sedan

    Subaru
    $1,046.99
  • Borla Cat-back TM & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA® Sound of Power respected by motoring enthusiasts everywhere.

    2008-2011 Subaru Impreza 2.5L 4cyl AWD Auto/Manual Trans 4-Door Hatchback

    Subaru
  • The Invidia Q300 Exhaust has been designed to be a quality exhaust for those in the market who wants something that delivers performance, without compromising on quality. 

    Subaru
  • The best cat-back exhaust on the market for your FR-S or BRZ. Compatible with both manual and automatic transmissions. Finishing off the PERRIN catback is a straight through muffler and two 4" slash cut tips, one on each side.

    Scion
    Subaru
    $1,071.00
  • Borla stainless steel S-Type rear section exhaust systems once again have proven why Borla has led the aftermarket performance exhaust industry for over 30 years.

    Subaru
  • All 304 Stainless Steel construction with 3.5 inch double walled rolled tip and now with 3 inch piping. The FXT-RMA is a direct replacement for the factory muffler or can be used with our Stealthback exhaust system (WS-DP; WS-CP/RP; WS-MP) to create a full turboback exhaust system for your Forester XT. Bring out that nice "Boxer Rumble" and let them know that there's a little something under the hood!

    Subaru
  • The Forester XT Exhaust uses our 3 inch from the front flange all the way to our Staight through design muffler with a 3.5 inch tip. This is hands the the best sounding exhaust for the Forester XT and to top it all off it doesn't reduce down to 2.5 inches anywhere unlike some of the other exhaust systems. You should see a 10-12 whp gain with this catback without a problem. 

     

    All hardware is included to make this 100% bolt-on in your driveway.

    Subaru
  • The TurboXS WRX STI Standard Rear Muffler Assembly is the epitome of subdued looks but performance sound. It's a full 3 inch straight through design so this muffler can support well over 500whp while still offering a "low key" look and sound for the typical street 300-400whp enthusiast. To compliment your rear bumper fascia, the muffler features a 3.5 inch double walled tip that looks phenomenal.

    Subaru
  • TurboXS WRX STI Turboback Exhaust with Titanium Tip - 30+whp and 30= ft. lbs Gain

    Subaru
    $1,188.03
  • For those of you in the market for a performance catback system, then you should consider a system from one of the pioneers of the Japanese performance market, this is the Greddy Evolution GT catback exhaust system.

    Scion
    Subaru
  • The Tomei Type 80 Expreme Titanium Cat-Back Exhaust System has undergone a new revolutionary design to reduce weight and increase performance and horsepower. The new design has been fully fabricated using lightweight titanium to weigh 7.3 kg (16.1lbs) and with minimal bends, reducing exhaust turbulence under acceleration while improving throttle response, horsepower, and torque.


    Intended to become the direct factory exhaust system replacement, the exhaust hangers have been positioned to pair with OEM locations so, there is no need for additional modifications.

    Included:

    • Additional Exhaust Hangers
    • Gaskets, Clamps, and Mounting Hardware


    The Tomei Type 80 Expreme Titanium Cat-Back Exhaust System is a single exit style exhaust, providing that aggressive tone under acceleration and idle while remaining suitable for forced induction and those that wish a naturally aspirated form.


    Specifications:

    • Brand: Tomei
    • Installation Hardware Included: Yes
    • Piping Coating: No
    • Piping Flex Joint: No
    • Piping ID: 80mm
    • Piping Material: Titanium
    • Piping Taper: No
    • Silencer Included: Yes
    • Tip Material: Titanium
    • Tip Qty: 1
    • Tip Shape: Round
    • Tip Size: 115mm
    • Exit Side: Left

    Scion
    Subaru
    $1,190.00
  • Exhaust gasses are guided through 3-inch diameter tubing into the center inlet of the fully-24-inch wide muffler section. Internal to the muffler, the exhaust gasses pass through a reversed Y merge, efficiently splitting the exhaust into separate muffling chambers on each side of the canister. 2.5-inch outlets emerge symmetrically from each side of the canister and direct the exhaust out the rear through quad polished exhaust tips. This straight-through exhaust design is much more effective at reducing exhaust back-pressure as can be seen in the illustrations below: 304 stainless steel is used throughout the exhaust construction. All components are meticulously TIG welded for outstanding appearance and strength. Four custom exhaust tips fill the factory bumper cut-outs perfectly, protruding just enough to show off the COBB logos etched into the top of each polished tip. Perfect fitment is achieved with either the Subaru factory downpipe or the COBB 3" SS Downpipe. The COBB 3" SS Cat-back Exhaust for the 2008-2014 Subaru STI Hatch and 2011-2014 WRX Hatch is a triumph in design and execution. Install the COBB 3" SS Cat-back Exhaust on your STI or WRX and experience performance like no other.

    FEATURES:

    • Straight-through Optimum Flow Design
    • 304 Stainless Steel Construction
    • Quad Polished Tips
    • TIG Welded Direct Replacement for OEM
    • Fits COBB 3" SS or Stock Downpipe

    Subaru
    $1,250.00
  • Tomei has really done it this time. Notice a lack of a certain word in the title of this product? The missing word is tip. That word is missing because this is an entire Titanium exhaust at a very affordable price.

    Subaru
    $1,190.00
  • Tomei’s Expreme Ti Exhaust Systems are some of the most innovative exhaust systems available that has piqued the interest of the sport compact community. Here you have an entire cat-back system crafted out of titanium, at an affordable price.

    Subaru
    $1,190.00
  • For a good balance of price and performance, Invidia offers the motorsports enthusiasts a strong line-up of Invidia N1 Exhausts that are constructed with high-quality SUS304 stainless steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains, as well as an increase in horsepower and torque.

    Subaru
  • For a good balance of price and performance, Invidia offers the motorsports enthusiasts a strong line-up of Invidia N1 Exhausts that are constructed with high-quality SUS304 stainless steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains, as well as an increase in horsepower and torque.

    Sedans only.

    Subaru
Showing 1 - 20 of 63 items