Rock Sliders

Rock Sliders & Body Armor

Rock Sliders

Rock Sliders & Body Armor

Showing 1 - 7 of 7 items
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

     

     

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car using existing holes while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

    Trimming of the side skirt required for installation 

     

    *Does not fit XT models.

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

     

     

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

     

     

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

     

     

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

     

    We have options to select depending on whether your Forester has factory mudflaps or not, please make sure you select the right mudflap option for your car!

     

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step. Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 3 holes through each pinch weld to complete the installation.

     

    Heavy-duty 3/16" steel base for superior strength

    Acts as a step to reach items in a roof basket

    Can be used as a jacking point

    Sandwiches the pinch welds for extra strength - NOTE: 3 holes must be drilled through each pinch weld

    Best ground clearance available, only 1" loss of ground clearance at the pinch weld

    Black texture powder coat for excellent corrosion resistance

    Drilling required to complete installation

     

     

    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

     

    Subaru
    $1,048.95
  • RalliTEK Rock Sliders are designed and tested for the avid off-road enthusiast that is looking to push the limits each time they are off-road. The base plate is made from 3/16" steel for premium strength while still being weight conscious and the top plate is made from 1/8" steel for rigidity and to also act as a step.


    Each rock slider has 2 heavy-duty brackets at the front and rear of each slider that attaches to the chassis of the car while also sandwiching the pinch welds on either side. You will need to drill 5 holes through each pinch weld to complete the installation.

     

    FEATURES:

    • Heavy-duty 3/16" steel base for superior strength
    • Acts as a step to reach items in a roof basket
    • Can be used as a jacking point
    • Sandwiches the pinch welds for extra strength - NOTE: 5 holes must be drilled through each pinch weld
    • Best ground clearance available, only 1" loss of ground clearance at the pinch weld
    • Black texture powder coat for excellent corrosion resistance
    • Drilling required to complete installation


    KIT INCLUDES:

    • 1 x Right arm - RTEK-900460
    • 1 x Left Arm - RTEK-900461
    • 1 x Left Leg - RTEK-900462
    • 1 x Right Leg - RTEK-900463
    • 1 x Top PLate - RTEK-900464
    • 1 x Bottom Left Plate - RTEK-900340
    • 1 x Bottom Right Plate - RTEK-900342
    • Installation Hardware


    ***FLAT RATE SHIPPING WITHIN THE CONTINENTAL USA IS ONLY $99.99. IF YOU ARE OUTSIDE THIS AREA PLEASE EMAIL INFO@RALLITEK.COM OR CALL 503-619-0055 FOR THE BEST SHIPPING QUOTE***

    Subaru
    $1,048.95
Showing 1 - 7 of 7 items