Lift Kits

Lift Kits Includings combinations of front and rear springs and spacers

Lift Kits

Lift Kits Includings combinations of front and rear springs and spacers

Showing 1 - 20 of 54 items
    • Limited Run, Available While Supplies Last!
    •  
    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Black Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment

    Subaru
    • Limited Run, Available While Supplies Last!
    •  
    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Black Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment

    Subaru
    • Ride Height:  Estimated +1.25" LIFT*
    • 0.25" RalliTEK Sport Springs
    • 1" RalliTEK Spacers
    • Spring Rate: 265 lb/in
    • 25-35% stiffer than OEM
    • Fits with OEM and KYB struts
    • Increases towing capacity

    PRICE IS PER PAIR OF SPRINGS.

     

    *Product Disclaimer:

     

    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, add-ons, or additional modifications. 

     

    Subaru
  • Ride Height: Estimated +1.25" LIFT*

    • 0.25" RalliTEK Sport Springs
    • 1" RalliTEK Spacers
    • Spring Rate: 320 lb/in
    • 25-35% stiffer than OEM
    • Fits with OEM and KYB struts
    • Increases street stability and towing capacity
    • Increases off-road performance
    • Pair of RalliTEK Spring Isolators (YOU DON'T NEED TO ORDER SEPERATLY)

    PRICE IS PER PAIR OF SPRINGS.

     

    *Product Disclaimer:

    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, add-ons, or additional modifications.

    Subaru

  • Crosstrek Rear Overload Lift Kit

    These overload springs are designed to help eliminate the "sagginess" out of the rear that the Outback is famously known for. Their increased spring rate also allows for better street stability and higher towing capability, all while maintaining off-road articulation. This spring is labeled as a Constant Load spring meaning these are geared towards the customer that is constantly loaded down with overlanding gear; the car will have a very harsh ride from the rear if empty.

     

    • Ride Height: Estimated +1.5" LIFT*
    • 0.5" RalliTEK Overload Springs
    • 1" RalliTEK Spacer
    • Spring Rate: 355 lb/in
    • 40-50% stiffer than OEM
    • Fits with OEM, Bilstein and KYB struts
    • Increases street stability and towing capacity
    • Increases off-road performance

    PRICE IS PER PAIR OF SPRINGS.

     

    *Product Disclaimer:

    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, add-ons, or additional modifications.

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. The 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough.


    Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!


    SPECIFICATIONS:

    • 3/16” MIG Welded Steel Construction
    • Alignment Corrections Designed Into the Front Spacers
    • Hammered Blue Powdercoat
    • Multi-Link (Rear Subframe) Spacers Included
    • All Hardware Included
    • Includes 1.5" rear subframe spacers to maintain rear ground clearance and an OEM alignment
    • Extended Exhaust Hangers Included


    NOTE:

    NOT RECOMMENDED FOR USE WITH 0.75" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)

    Subaru
  • Our super raised lift kit includes everything needed to add some serious lift to your vehicle. The kit includes our camber/caster corrected 2” front top hat spacers, rear 2” top hat spacers, 1” lifted springs, adjustable trailing arm brackets, rear camber bolts, and our rear subframe drop spacers. Our lifted springs help add some stability to your lifted vehicle, while our corrected top hat spacers, trailing arm brackets, camber bolts, and subframe drop all help to maintain a close-to-stock alignment at a raised ride height. Keep in mind this is an extreme lift and the rear wheel may still move slightly from its center in the wheel well, however, our alignment correction components help offset this change and maintain as close to OEM specs as possible.


    Ride Height: Estimated +3.25” Lift


    Features:

    • 1x RalliTEK 2” Front Camber/Caster Corrected Steel Spacers
    • 1x RalliTEK 2” Rear Steel Lift Spacers
    • 1x RalliTEK Adjustable Trailing Arm Bracket (pair)
    • 1x RalliTEK 1” Front Raised Springs
    • 1x RalliTEK 1” Rear Raised Springs
    • 1x SPC Camber Bolts (pair)
    • 1x Rear Subframe Drop Spacer Kit
    • 1x RalliTEK Front Spring Isolators (pair)
    • *Product Disclaimer:


    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less dependent on your vehicle's trim package, add-ons, or additional modifications.

    Subaru
    $1,030.38
  • Our 2” spacer lift kit with alignment correction offers a simple and effective solution to increase ride height and ground clearance while maintaining factory quality ride and alignment specifications. Our front 2” steel top hat spacers compensate for camber/caster as the car is raised, while our included trailing arm brackets aid in centering the rear wheel in the wheel well at a lifting height. Included camber bolts help correct rear camber to factory specifications to provide a comprehensive 2” lift package.

    Ride Height: Estimated +2” Lift

    Kit Includes:

    • 1x RalliTEK 2” Front Camber/Caster Corrected Steel Spacers
    • 1x RalliTEK 2” Rear Steel Lift Spacers
    • 1x RalliTEK Adjustable Trailing Arm Bracket (pair)
    • 1x SPC Camber Bolts (pair)


    *Product Disclaimer:


    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less dependent on your vehicle's trim package, add-ons, or additional modifications.

    RalliTEK Steel Lift Spacers

    RalliTEK lift spacers feature a 3/16” MIG welded steel construction, hammered blue powder coat, and all hardware needed for installation. RalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. Alignment is still required after installation. Make note that the center of gravity will be raised after installation. You may want to consider pairing this lift kit with a set of RalliTEK sport springs to improve handling both on and off-road!

    RalliTEK Adjustable Trailing Arm Brackets / Camber Bolts

    Tired of your wheels being moved forward when you lift your Subaru? RalliTEK's new Adjustable Trailing Arm Brackets will allow you to re-center your rear wheels without the need for a spacer and are a direct OEM replacement. They can accommodate OEM height all the way up to a 2" lift and can be fine-tuned to your specifications.

    Most Subaru models do not have a way to adjust the rear camber from the factory, as you raise the vehicle one can gain positive camber throwing off the factory alignment specifications. SPC Camber Bolts add the needed adjustability to your vehicle’s rear suspension to maintain factory camber specifications at a higher ride height.

    Subaru
  • The RalliTEK 2” lift kit the 2000-2004 Outback combines our 1” front sport springs, rear 1” overload springs, 1” top hat spacers, and rear 1” top hat spacers with Whiteline’s rear lateral link kit. Our lift spacers provide additional clearance, while our springs add stability, carrying capacity, and even more clearance! We included our rear overload springs in this package to help mitigate rear-end sag often found in Outbacks when carrying a full load of gear. We paired Whiteline’s rear lateral link kit with this kit to allow the rear wheels to be centered in the wheel well maintaining correct alignment specifications as the ride height is increased.

     

    *Ride Height: Estimated +2” lift

    Features:

    • RalliTEK Rear Raised Overload Springs 1” Lift
    • RalliTEK Front Raised Sport Springs 1” Lift
    • RalliTEK Rear Top Hat Spacers 1” Lift Kit
    • RalliTEK Front Top Hat Spacers 1” Lift Kit
    • Whiteline Rear Lateral Link Kit

     

    RalliTEK Springs:

    RalliTEK’s purpose for their springs is to provide an everyday solution for individuals who commute daily with their vehicle, but also enjoy adventures up to the mountain or country trail for winter sports or summer shenanigans. Springs that would not only solve relevant issues but also improve the vehicle’s ability to perform in different climates around North America.

     

    RalliTEK springs are designed, built, tested, and supported in Portland, Oregon, USA. A place is known for it's varying climates and terrain. RalliTEK's springs come with guarantees of satisfaction, manufacture warranties, and faster customer support than other off-road spring brands on the market.

     

    RalliTEK springs are made from chrome silicon spring steel. Chrome silicon spring steel is awesome for conditions involving high stress and for applications where shock or impact loading occurs. Chrome silicon wire can withstand higher and lower temperatures than high-carbon steel wire which makes it an obvious choice for RalliTEK users that make regular mountain trips in the snow and to Mordor. These springs make street driving more fun when unloaded due to the increase in the spring rate. Riding on the trail when loaded with RalliTEK springs makes steering response and tracking much more predictable than with the same weight on factory springs. 

     

    RalliTEK Spacers:

    These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.

     

    In comparison to aluminum spacers, our HDPE material is light-weight and not prone to additional NVH (Noise, Vibration, and Harshness), unlike typical aluminum spacers which transfer straight to the chassis. HDPE or high-density polyurethane has a compression yield strength of 20Mpa or 2900 pounds per square inch.

     

    Whiteline Rear Lateral Link Kit:

    This series of adjustable arms are designed to modify factory camber, toe, and track on the rear of the Subaru Legacy/Outback. The KTA124 utilizes 4 complete adjustable arms with low compliance, high-performance bushings. The result is a greater adjustment range, more precise adjustment, and a more direct connection between body and rear suspension delivering more predictable dynamic behavior.


    Note: These are race-style products designed for off-road use only. Reduced bushing and suspension compliance and range of available adjustments can dramatically change vehicle behavior and dynamics.

    Subaru
    $1,299.50
  • The RalliTEK 1.4” lift kit the 2000-2004 Outback combines our front sport springs, rear 0.4” overload springs, 1” top hat spacers, and rear 1” top hat spacers. Our lift spacers provide additional clearance, while our springs add stability and carrying capacity! We included our rear overload springs in this package to help mitigate rear-end sag often found in Outbacks when carrying a full load of gear.

     

    *Ride Height: Estimated +1.4” rear lift

    Features:

    RalliTEK Rear Raised Overload Springs 0.4” Lift

    RalliTEK Front Raised Sport Springs 0” Lift

    RalliTEK Rear Top Hat Spacers 1” Lift Kit

    RalliTEK Front Top Hat Spacers 1” Lift Kit

     

    RalliTEK Springs:

    RalliTEK’s purpose for their springs is to provide an everyday solution for individuals who commute daily with their vehicle, but also enjoy adventures up to the mountain or country trail for winter sports or summer shenanigans. Springs that would not only solve relevant issues but also improve the vehicle’s ability to perform in different climates around North America.

     

    RalliTEK springs are designed, built, tested, and supported in Portland, Oregon, USA. A place is known for it's varying climates and terrain. RalliTEK's springs come with guarantees of satisfaction, manufacture warranties, and faster customer support than other off-road spring brands on the market.

     

    RalliTEK springs are made from chrome silicon spring steel. Chrome silicon spring steel is awesome for conditions involving high stress and for applications where shock or impact loading occurs. Chrome silicon wire can withstand higher and lower temperatures than high-carbon steel wire which makes it an obvious choice for RalliTEK users that make regular mountain trips in the snow and to Mordor. These springs make street driving more fun when unloaded due to the increase in the spring rate. Riding on the trail when loaded with RalliTEK springs makes steering response and tracking much more predictable than with the same weight on factory springs. 

     

    RalliTEK Spacers:

    These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.

     

    In comparison to aluminum spacers, our HDPE material is light-weight and not prone to additional NVH (Noise, Vibration, and Harshness), unlike typical aluminum spacers which transfer straight to the chassis. HDPE or high-density polyurethane has a compression yield strength of 20Mpa or 2900 pounds per square inch.

    Subaru

  • Ride Height: +0.75" FRONT & 1.25" REAR LIFT*

    • 0.75" Front Springs
    • 0.75" Rear Springs
    • 0.5" Rear Top Hat Spacers
    • Spring Rate: 215 lb/in Front & 355lb/in Rear
    • 18-20% stiffer than OEM
    • Fits with OEM and KYB struts
    • Increases street stability and towing capacity
    • Increases off-road performance

    Looking for our spring isolators to keep your springs quiet? Look here!

     

    *Product Disclaimer:

    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less dependent on your vehicle's trim package, add-ons, or additional modifications. 

    Subaru
    • Ride Height: +1.25" FRONT & 1.75" REAR LIFT*
    • 0.75" Front Springs
    • 0.5" Front Top Hat Spacers
    • 0.75" Rear Springs
    • 1" Rear Top Hat Spacers
    • 1.5" Rear Subframe Drop for Alignment Correction
    • Spring Rate: 215 lb/in Front & 355lb/in Rear
    • 18-20% stiffer than OEM
    • Fits with OEM and KYB struts
    • Increases street stability and towing capacity
    • Increases off-road performance

    Looking for our spring isolators to keep your springs quiet? Look here!

     

    *Product Disclaimer:

    The advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less dependent on your vehicle's trim package, add-ons, or additional modifications. 

    Subaru
Showing 1 - 20 of 54 items