Accessories

Fog light covers, emblems, paint, and even aftermarket antennas. Find some fun and useful exterior accessories for your Subaru here!

Accessories

Fog light covers, emblems, paint, and even aftermarket antennas. Find some fun and useful exterior accessories for your Subaru here!

Showing 1 - 15 of 15 items
  • Included with the RTEK-114141 & RTEK-112991 RalliTEK skid plates. 

    This is in case you lost yours or they need replacing.

    Subaru
  • Included with the RTEK-109720 RalliTEK skid plate. 

    This is in case you lost yours or they need replacing.

    Subaru
  • Included with the RTEK-112950 RalliTEK skid plate. 

    This is in case you lost yours or they need replacing.

    Subaru
  • Included with the RTEK-109790 RalliTEK skid plate. 

    This is in case you lost yours or they need replacing.

    Subaru
  • Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process. 

     

    Made out of 6061 Aircraft Aluminum

    Anodized in 5 different colors

    Designed with a larger outside diameter for a flatter taper to slide over obstacles easier

     

    SOLD AS A PAIR

     

    Dimensions
    Outer Diameter: 1.625"
    Height: 0.430"
    Recessed Hole: 0.700"
    Bolt Hole: 0.340"

     

    Subaru
  • Want to add a little flair to your skid plates and also offer some protection for the bolt heads? Look no further because RalliTEK can help you! With these RalliTEK Dome Washers, you can slide your skid plate over anything and not worry about damaging or getting hung up on the bolt heads in the process. 

     

    Made out of 6061 Aircraft Aluminum

    Anodized in 5 different colors

    Designed with a larger outside diameter for a flatter taper to slide over obstacles easier

     

    SOLD AS A PAIR

     

    Dimensions
    Outer Diameter: 2.000"
    Height: 0.500"
    Recessed Hole: 0.845"
    Bolt Hole: 0.430"

    Subaru
  • RALLITEK RECOVERY GEAR BAG:

    This is a special staff-picked collection of recovery gear packed with a convenient Canvas Storage bag to store the gear while you are out enjoying the trails!


    *Gear bag includes the following items:

    CAMPING STORAGE BAG


    OVS / RalliTEK edition line of bags comes in a variety of options and is an eco-friendly alternative to ballistic nylon. Each bag has been handcrafted out of premium cotton infused with Parrifin, known as a wax canvas which is a waterproof breathable material.


    Manufactured to exacting specifications featuring reinforced stitching, heavy-duty zippers, and oversized buckles; our Canyon Bag lineup ranges from tool bags, first airbags, general-purpose to portable trail/ trash bags, and everything in between.


    Features:

    • HEAVY-DUTY ZIPPERS W/PULL TABS
    • PERFECT TO ORGANIZE SMALL ITEMS
    • CAN BE USED WITH ALL CANYON BAGS

    TOW STRAP 2" X 30' WITH STORAGE BAG


    Each 30' strap is engineered and tested statically to surpass breaking strength requirements to ensure you have the safest product available. Each strap comes with a storage bag and should be paired with our recovery shackles.


    Features:

    • Manufactured out heavy-duty synthetic fiber
    • 30’ long 2” wide folded and double stitched end with a heavy-duty padded protective sleeve
    • Loop size is 10” which is ideal for all types of rigging
    • Ideal for daisy-chaining vehicles through tough obstacles or long pulls
    • Tightly woven 30 strands per inch reinforced synthetic fiber
    • Weight:3.00 LBS, Width:8.00 (in), Height:18.00 (in), Depth:11.00 (in)
    • Breaking Strength of 20,000 lbs
    • Included storage bag with mesh at the bottom that allows dirt and debris to escape

    TOW STRAP 4" X 8' WITH STORAGE BAG


    Overland vehicle Systems provide you with Professional Grade recovery gear for any situation. If and when you get stuck our straps are designed to work time after time. We start with high-quality tightly woven synthetic fiber that features double looped ends with a reinforced protective sleeve that is double stitched that will not stretch or deform. Each 30' strap is engineered and tested statically to surpass breaking strength requirements to ensure you have the safest product available. Each strap comes with a storage bag and should be paired with our recovery shackles.


    Features:

    • Manufactured out heavy-duty synthetic fiber
    • 8’ long 4” wide folded and double stitched end with a heavy-duty padded protective sleeve
    • Loop size is 10” which is ideal for all types of rigging
    • Ideal for daisy-chaining vehicles through tough obstacles or long pulls
    • Tightly woven 30 strands per inch reinforced synthetic fiber
    • Weight:3.00 LBS, Width:10.00 (in), Height:18.00 (in), Depth:16.00 (in)
    • Breaking Strength of 40,000 lbs
    • Included storage bag with mesh at the bottom that allows dirt and debris to escape

    RECOVERY RING 4.00" WITH STORAGE BAG


    The Overland Vehicle Systems Recovery Ring is designed to make recovery safer, faster, and more reliable. Its unique design is manufactured out of T6 6061 Aircraft Grade aluminum which won’t rust or corrode.


    Features:

    • Manufactured out of T6 6061 Aircraft Grade Aluminum
    • 41,000 lb. breaking strength
    • 50% stronger than traditional snatch blocks
    • Weighing .9 lbs. makes this 50% lighter than traditional rigging
    • Comes with a storage bag with a quick cinch
    • Limited lifetime manufacturer's warranty

    RECOVERY SHACKLES 3/4" 4.75 TON (2-PACK)


    Overland Vehicle Systems D Ring Shackles 3/4" (2 Pack) 57,000 lbs. Break Strength with 7/8'' Pin Heavy Duty D Ring Shackle For Recovery Off-Road For Tow Strap, Bumper, Winch, Snatch Block & Towing Jeep Truck SUV RV.


    Features:

    • ¾” Hot Forged Bow and 7/8” Pin
    • Electrostatic Plated (E-Coated) Base with a Secondary Powder Gloss Finish
    • or Zinc Corrosion Resistant Coating
    • 57,000 Lb. Breaking Strength with a 19,000 Lb. Working LOAD

    MULTI-FUNCTIONAL MILITARY-STYLE UTILITY SHOVEL WITH NYLON CARRYING CASE


    The Overland Vehicle System Utility Shovel is manufactured with a glass-filled nylon reinforced handle with a locking collar that offers exceptional grip. Our spades are produced with #50 Boron Steel which is stronger and lighter than regular carbon steel shovels. The lightweight 7075 aluminum shaft is lighter and stronger and won't corrode.


    Features:

    • Adjustable Spade with Two Positions to Dig or Trench
    • Two-Stage Black Powder Coat that won’t corrode or rust
    • Overall Length 22.75-Inch
    • Collapsed 9.25 inch
    • Roll Edge on Rear and Side For Added Strength
    • Nylon Reinforced Carrying Case

    53 PIECE TIRE REPAIR KIT


    Overland Vehicle Systems D Ring Shackles 3/4" (2 Pack) 57,000 lbs. Break Strength with 7/8'' Pin Heavy Duty D Ring Shackle For Recovery Off-Road For Tow Strap, Bumper, Winch, Snatch Block & Towing Jeep Truck SUV RV.


    Features:

    • Over-sized T Style Handle Reamer & Probe
    • Self-Vulcanized Plugs
    • Extended Heavy-Duty Needle Nose Pliers
    • Pencil Style Dual Pressure Gauge & Dual Chuck
    • Valve Repair Kit Which Includes Valve Cores
    • Plastic and Chrome Valve Caps
    • Tire Deflators & 4 Way Valve Tool Kit

  • Premium Cross Bars System for Factory Side Rail Mount:  A heavy-duty, aerodynamic, and universal crossbar to mount your gear on. Overland Vehicle Systems Freedom Cross Bars are perfect for many adventures, Overlander, Campers, Kayaker, Cyclist, Traveler, Surfer, Contractor, and Other Cargo Needs. Overland Vehicle Systems Freedom Cross Bars come in 4 different lengths: 50” 55”, 60”, and 70”. The Freedom Cross Bars are secured to lockable mounts. T Slots on the Overland Vehicle Systems Freedom Cross Bars allow for many diverse types of accessories to be secure to them; Roof Top Tents; 270 Degree Awnings, 180 Awnings, another overland, and travel essentials.

    Features:

    • Superior Quality: The Overland Vehicle Systems’ Freedom Cross Bars are manufactured out of Aircraft Grade Aluminum. Made from a single piece of extruded Aluminum to ensure structural integrity. 2 Stage Powder Coating.
    • Features:  Quick and easy installation. Quick and easy removal. Fast and easy lockable mounts for the Factory Roof Rails. The integrated T-Slots allow for quick accessory installation. Durable and Built to Last.
    • Included:  Your choice of a 50”, 55”, 60” or 70” Cross Bar rail length, mounting brackets for Factory Side Rails, Free Shipping. USA Call Center Support
    • Simple Installation: Allow for 15 – 30 minutes for Installation. The Freedom Cross Bars will accommodate most Factory Cross Rails. Follow the detailed instructions we provide or contact our USA Call Center.
    • Four-Year Limited Warranty: Overland Vehicle Systems Freedom Cross Bars System for Factory Side Rails comes with a 4 Year Limited Warranty. Overland Vehicle Systems warranty includes coverage for products with manufacturing defects in materials and workmanship.
    • Application: Overland Vehicle Systems Freedom Cross Bars will work with most Factory Side Rails.

    Fitment:

    *Universal - Please confirm Factory Cross Rail weight capacity prior if you’re unsure.

    Specifications:

    • Cross Bar Material: Aircraft Grade Black Powder Coated Aluminum
    • Bar Length Options: 50", 55”, 60”, 70”
    • Bar Style: Extended Overhang Bar
    • Height: @ 3 1/2"
    • Number of Bars: 2
    • Number of Lockable Mounts: 4
    • Lockable: Yes
    • Keys: 2
    • Color: Black
    • Mounting Style: Removable
    • Mount Type: Factor Roof Rail Mount
    *Important Notes: Check your vehicle's weight capacity for the Factory Roof Rails

    Weight:

    • 50” – 15 LBS
    • 55” – 15.5 LBS
    • 60” – 16 LBS
    • 70” – 17 LBS

    Subaru
  • The SMY door striker and hinge stopper covers get installed over the door striker and the hinge stopper going to the chassis. It gives your car more of a luxury car look.

  • We introduce our newest product for Subaru Impreza models from 1996-2008; the GrimmSpeed Antenna Delete Plate. The purpose of this product is to replace the OEM whip-style antenna that many drivers dislike and therefore do not fully extend. Due to this, it is difficult to obtain quality radio coverage. 

    Subaru
  • Spruce up the looks of your FR-S with a pair of Carbign Craft Carbon Fiber fender vents. Your OEM "86" badge attaches right on top of these giving an OEM+ look.

    Scion
  • Replace your stock grill emblem with the distinctive look of the JDM Impreza "i" badge. It just sticks in place of your old one.

    This badge is not a direct replacement on the 06-07 cars. You will need to use some additional double sided foam tape to install it completely. There is also a plastic nub on the back of the badge that you need to remove.

    Subaru
  • The Side Window Deflectors provide additional style to any Impreza. The Side Window Deflectors also keep unwanted rain from entering the vehicle. Specifically designed for Subaru, the Side Window Deflectors combine both form and function that can not be matched by aftermarket products. 

    These will fit both the hatchback and sedan.

    These will not fit on cars with the optional SPT Carbon Fiber B pillar covers.

    Subaru
  • For those of you who like to have a nice collection of genuine JDM parts on your vehicle, here are the JDM STI R205 fender ornaments. These are black, and are very pleasing to the eye especially if you’re not a fan of the factory chrome ornaments found on USDM models.

    Installation is fairly simple. They are installed using a high quality double sided tape. So take your time, peel the old ones off and simply replace them with the new STI units.

    STI & WRX 2011-2014 / STI 2008-2010 Hatchback Only

    Subaru
  • Show your COBB Tuning love with this raised emblem. Installs using the pre-installed double sided tape.

Showing 1 - 15 of 15 items