RalliTEK 4EAT Transmission Mount Insert Bushing

New

RalliTEK

RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmisson Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.

 

  • Improved shift feel and enhanced response.
  • Installs in your factory transmission mount.

When you order a RalliTEK transmission mount insert and a new OEM AT transmission mount from us, we will install your insert in the mount for free prior to shipment! (Does not include installing mount onto vehicle). 

More details

$44.99

Tested and Backed by RalliTek

Designed specifically for the smaller mount made for Subaru 4 speed automatic transmissions. Requires removal of factory mount from vehicle. Bushing insert installs best with a bench vice. Install instructions are included. Usually takes less than one hour to install from start to finish.

 

RalliTEK offers two versions of this insert. One is soft for everyday street driving, the second is hard for track use. You can use the hard insert for everyday driving, but be aware it will contribute to a bit more drivetrain noise than our softer version!

 

Fits 1988–1991 Subaru XT, 1990–2004 Subaru Legacy, 1992–1997 Subaru Alcyone SVX, and all Subarus 1995–2007 & 4EAT transmission.


 

This 4EAT transmission mount is a genuine OEM Subaru part #41022AE121.

 

  • Race version may cause additonal NVH.
  • Automatic Transmission Only!
  • Only works with the one piece transmission mounts. Some Subaru applications have a two piece style mount.
Grade 
Tim B 10/06/2017

Extremely easy to install.

I bought the soft version for my 05' Subaru Baja non turbo automatic in to a bra d new transmission mount. It took more time to put on the grease than to slide in. It honestly took me less than 30 seconds to push it in by hand.

    Grade 
    Jeffrey B 10/10/2015

    2004 Subaru Forester XT

    I installed this with a friend with four jack stands - two jacks and a couple beers. Even with messing around we got the car up and everything out and back in, in under an 2 hours. We did have to shimmy the cross member out because of my 3 inch exhaust but it still came out without removing it. Once it was out i used the supplied grease and a table vise and it went right in. That took all of 3 minutes. Key is keeping the bushing and the mount aligned. Extra hands come in handy! ;p

    I bought the hard mount because I have already gone through one trans and didn't want to mess around with stuff moving around under a heavy load. With that said I have a full exhaust and UEL headers. I can feel and hear the trans slightly. The exhaust still drowns out any extra noise this thing adds and for the piece of mind knowing its down there doing its job i honestly wouldn't mind if it made tons of noise. I hope to add more stuff from RalliTEK in the future because the fit and quality is second to none.

    Thanks RalliTEK!

    Jeff B. - Fozmafia

    • 2 out of 2 people found this review useful.

    Write a review

    RalliTEK 4EAT Transmission Mount Insert Bushing

    RalliTEK 4EAT Transmission Mount Insert Bushing

    RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Transmisson Mount Insert provides improved shift feel and response. This bushing will insert into your factory transmission mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.

     

    • Improved shift feel and enhanced response.
    • Installs in your factory transmission mount.

    When you order a RalliTEK transmission mount insert and a new OEM AT transmission mount from us, we will install your insert in the mount for free prior to shipment! (Does not include installing mount onto vehicle). 

    Write a review

    Subaru Performance Parts