Innovate LM-2 Kit Single Channel Digital AFR Meter & Datalogger
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
Warning: Last items in stock!
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
|Mfgr. Warranty:||6 Months|
|Gauge Backlight Color:||None|
|Gauge Face Color:||Black|
|Gauge Range:||7.35:1 - 22.39:1|
|Gauge Sending Unit:||Electrical|
|Gauge Type:||Air Fuel|
|Requires Control Unit :||No|
|Wideband Sensor Type:||Innovate|
No customer comments for the moment.