Strut Tower Bars

Strut tower bars connect the top of either the front or the back pairs of struts on your vehicle to aid in the prevention of chassis flexing during cornering.

Strut Tower Bars

Strut tower bars connect the top of either the front or the back pairs of struts on your vehicle to aid in the prevention of chassis flexing during cornering.

Showing 1 - 20 of 43 items
  • Quick release clamps allow for quick and easy removal of strut tower braces, a must for any Whiteline strut brace that is regularly removed. This quick release clamp suits all Whiteline strut tower braces.

  • The Perrin Strut Tower Brace has been designed to improve the handling in your vehicle. This is achieved by reducing body roll over sharp cornering, resulting in better chassis refinement, and better response. These are perfect for those who like to enjoy the weekend autocross, time trial, or spirited canyon run.  Installation is simple by employing the factory hardware to install over the strut bar once installed.

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The Perrin Strut Tower Brace has been designed to improve the handling in your vehicle. This is achieved by reducing body roll over sharp cornering, resulting in better chassis refinement, and better response. These are perfect for those who like to enjoy the weekend autocross, time trial, or spirited canyon run.  Installation is simple by employing the factory hardware to install over the strut bar once installed.


    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The AEM- 29-0009 performance strut tower bar provides additional vehicle stability on some Scion FR-S and Subaru BRZ models. AEM strut tower bars are constructed as a single welded assembly from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM- 29-0009 is designed with a brake master cylinder brace which increases brake pedal firmness providing more predictable braking performance. It comes in an attractive charcoal gray powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut tower bar is easy to install using the existing factory mounting points requiring only commonly available tools to do the job. 

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Scion
    Subaru
  • The AEM-29-0011WR performance strut bar provides additional vehicle stability on various Subaru WRX and WRX STI models. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0011WR performance strut bar comes in a textured red powder coated finish featuring the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install in just minutes onto the existing strut tower bolts. 


    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The AEM performance strut bar provides additional vehicle stability on various Subaru Impreza WRX and STI models. AEM strut bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM performance strut bar comes in a charcoal gray powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install using the existing factory mounting points.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The Type ALC OS starts out the same as the classic Type OS bar, but offers a different look. The tubular aluminum oval shaft is carried over from the Type OS, and then wrapped in carbon fiber. The end plates are painted gray and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The Type 40 is made of aluminum and features a high polish finish with gray end plates. The diameter of this bar is 40mm, which is just a bit over 1". It comes with all the required hardware for installation and bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • Strut Tower Bars or Braces are designed to lay on top of your strut mounts and to stiffen the car. You ask yourself how? Even though you may not be able to notice it, your car's body and chassis as a whole can flex and bend. A Strut Tower bar will help stiffen up the chassis of the car. The Cusco Rear Strut Tower Bar will certainly not leave you disappointed. 

     

    A strut tower bar is not only functional but it provides for some nice eye candy whether it be in your engine bay or trunk.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The Type ALC OS starts out the same as the classic Type OS bar, but offers a different look. The tubular aluminum oval shaft is carried over from the Type OS, and then wrapped in carbon fiber. The end plates are painted gray and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Scion
    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools. 

    On AT equipped cars it may be necessary to relocate a bracket and wiring harness to install this bar correctly.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Scion
    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Scion
    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools. 

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.


    Require to trim interior panel to install.


    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
  • The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

     

    Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

    Subaru
Showing 1 - 20 of 43 items