Prevent nasty pre-turbo and post-turbo exhaust leaks and noises on your Subaru by replacing old worn out exhaust gaskets and hardware.
Prevent nasty pre-turbo and post-turbo exhaust leaks and noises on your Subaru by replacing old worn out exhaust gaskets and hardware.
SUBA-44011FA020
This high quality TiAL gasket will help ensure you do not have exhaust leaking between your manifold and wastegate. If there is a exhaust leak before the wastegate, you are not only losing power but also proper boost control as well.
APS Downpipe owners, you finally have a great replacement gasket for your APS Downpipe! We know that you have frequent blowouts, so Grimmspeed has delivered a very high quality and thick gasket for you.
Gasket Layers: | 2 |
Material: | Stainless Steel |
This extra-thick gasket lies between the downpipe and catback on a 3" exhaust system. At 12 layers, this gasket is twice as thick as most gaskets, providing unsurpassed leak protection. Ideal for both imperfect and perfect flanges due to their thickness.
Gasket Layers : | 12 |
Material: | Stainless Steel |
Replace your worn or leaking OEM donut gasket with this fiber-reinforced graphite donut gasket at a fraction of the cost.
GrimmSpeed has provided you with new J-Pipe hardware. Every time you remove or replace your J-Pipe, you should use new hardware upon re-assembly to save time and avoid the hassles caused by old hardware. Hardware used in exhaust components can become stubborn over time due to extreme heat cycles they endure. GrimmSpeed has saved you the inconvenience by providing you with new hardware.
This is Grimmspeed’s Turbo to Downpipe/J-pipe gasket for the 2015 WRX. These are a great idea for those of you who are planning on removing or replacing your downpipe for maintenance or upgrades. These are OEM-style, however the Grimmspeed units are multi-layered steel and are 22% thicker than the OEM gaskets.
Gasket Layers: | 7 |
Material: | Stainless Steel |
QTY: | 1 |
Mfgr. Warranty: | 2 Years |
Grimmspeed has once again extended their parts catalog with innovative and quality products. This is the manifold to turbo gasket. Designed just like the OEM gasket, however this example is thicker, and more durable.
Gasket Layers: | 7 |
Material: | Stainless Steel |
QTY: | 1 |
Mfgr. Warranty: | 2 Years |
Don’t let a pesky exhaust leak ruin the beautiful exhaust tone from your turbocharged Subaru. The Mishimoto Subaru Exhaust Adapter allows a smooth exhaust flow transition between your 3” downpipe and stock sized exhaust.
This is the replacement gasket for your Turbosmart Blow Off Valve on your 2008-2014 Subaru WRX.
This Tomei gasket is a must for someone replacing their exhaust manifold or up-pipe and looking to acquire a proper leak-free seal. The sole job of this gasket is to provide a seal to keep whatever it is inside the pipe where it belongs, in the pipe.
This is a Genuine Subaru OEM part. This gasket goes between the crossover pipe and the collector. The crossover pipe and collector are often disconnected during up-pipe installs and the gasket should be replaced anytime you disconnect the crossover pipe and collector.
This is a genuine Subaru OEM part. This is the gasket between the upper catalytic converter in the downpipe and the second catalytic converter.
This is a Genuine Subaru OEM part. This gasket goes between the crossover pipe and the collector. This gasket should be replaced anytime you disconnect the crossover pipe and collector.
This is a Genuine Subaru OEM part. This gasket lies between the turbo and the downpipe. Recommended for the installation of a new downpipe.
This is a Genuine Subaru OEM part. This gasket lies between the turbo and the downpipe. Recommended for the installation of a new downpipe.
This is a Genuine Subaru OEM part. This gasket lies between the stock midpipe and muffler.
This replacement bracket is for someone who has misplaced their bracket or damaged it.
This is a Genuine Subaru OEM part. It is a multi-layer gasket and is very high quality. This gasket lies between the header and the up-pipe and provides a leak free seal. Recommended for purchase with a new up-pipe.
This is a Genuine Subaru OEM part using a multi-layer design for a proper seal and long life. This gasket lies between the head and the exhaust manifold. Package includes one gasket but 2 are required for a complete manifold install.
This replacement bracket is for someone who has misplaced their bracket or damaged it.