> Your Adventure Starts Here>Off-Road Lighting>Light Mounts & Accessories
Light Mounts & Accessories

Wire up and mount your new lights!

Light Mounts & Accessories

Wire up and mount your new lights!

Showing 1 - 20 of 29 items
  • Sale!

    Ditch your old light setup for our new RalliTEK Ditch Light Mounts! 

     

    • Mounts to Hood Brackets Using Existing Hardware
    • Gusseted For Extra Rigidity 
    • Powder Coated For Excellent Corrosion Resistance
    • 1/8" Thick Laser Cut Steel
    • Wire Retainer and Clips Included 
    • 2x2 Light Pod Recommended
    • Installation Instructions Found Under Download Tab

    SOLD AS A PAIR

    Subaru
    $79.95
  • Sale!

    Ditch your old light setup for our new RalliTEK Ditch Light Mounts! 

     

    • Mounts to Hood Brackets Using Existing Hardware
    • Gusseted For Extra Rigidity 
    • Powder Coated For Excellent Corrosion Resistance
    • 1/8" Thick Laser Cut Steel
    • Wire Retainer and Clips Included 
    • 2x2 Light Pod Recommended
    • Installation Instructions Found Under Download Tab

    SOLD AS A PAIR

    Subaru
    $89.95

  • Introducing our new RalliTEK License Plate Light Mount! This all steel mount is designed to bolt into the factory license plate location and accepts most aftermarket pod lights. We recommend wiring in the lights to your factory reverse lights to provide extra visibility when you need it most!

     

    • 1/8" Thick Mild Steel
    • Hardware Included
    • Lights Will Not Interfere With Rear Camera or Create Glare
    • Textured Black Powdercoat Finish
    • Laser Engraved RalliTEK logo
    • Mounts to Factory USDM License Plate Location
    • DOES NOT INCLUDE POD LIGHTS

    Find Lighting Options HERE!

    $109.00

  • Boast your off-road prowess with RalliTEK Swag!

     

    Purchase just one or be adventurous and get them all.

    $3.00

  • FEATURES

    • Heavy Duty Toggle Switch Included on Harness
    • P-UCA Power Lights Through Cigarette Plug
    • Industry Standard Weatherproof Connector
    • 30A 12V Relay Included on Harnesses
    • Multiple Harness Types Available

    $39.00

  • FEATURES

    • Shatterproof Polycarbonate
    • Black Out Cover With Logo
    • Glow In The Dark "X"

    Colored Covers
    With four different color options each with a different specific use. Red is designed to reduce light temperature and glare back to enhance penetration in dust and air particulate. Yellow is designed for foggy conditions by reducing the amount of blue light. Blue covers increase the light distance when used in snow by reflecting the blue light off the snow. Clear is used to protect against dust and debris.

     

    Beam Covers
    Five different beam options and 1 black out cover allow you to take your light and turn it into 21 different lights. A Euro cover creates a flat, horizontal beam designed to light peripherals while maintaining distance. A Flood cover is used for low-speed, vertical trail flood beam lights the road to the tree tops. Wide flood is a low-speed, horizontal flood beam gives a wide blanket of light. An Elliptical beam creates distance and spread while limiting periphery lighting for driving in traffic. Spot lens is a protective clear cover that stops particulate from damaging the lights.

    $15.00

  • FEATURES

    • Transforms Light Into 20 Lights In 1
    • Change Beam Pattern In A Snap
    • Shatterproof Polycarbonate
    • Black Out Cover With Logo
    • Glow In The Dark "X"

    Colored Covers
    With four different color options each with a different specific use. Red is designed to reduce light temperature and glare back to enhance penetration in dust and air particulate. Yellow is designed for foggy conditions by reducing the amount of blue light. Blue covers increase the light distance when used in snow by reflecting the blue light off the snow. Clear is used to protect against dust and debris.

     

    Beam Covers
    Five different beam options and 1 black out cover allow you to take your light and turn it into 21 different lights. A Euro cover creates a flat, horizontal beam designed to light peripherals while maintaining distance. A Flood cover is used for low-speed, vertical trail flood beam lights the road to the tree tops. Wide flood is a low-speed, horizontal flood beam gives a wide blanket of light. An Elliptical beam creates distance and spread while limiting periphery lighting for driving in traffic. Spot lens is a protective clear cover that stops particulate from damaging the lights.

    $15.00

  • FEATURES

    • Transforms Light Into 20 Lights In 1
    • Change Beam Pattern In A Snap
    • Shatterproof Polycarbonate
    • Black Out Cover With Logo
    • Glow In The Dark "X"

    Colored Covers
    With four different color options each with a different specific use. Red is designed to reduce light temperature and glare back to enhance penetration in dust and air particulate. Yellow is designed for foggy conditions by reducing the amount of blue light. Blue covers increase the light distance when used in snow by reflecting the blue light off the snow. Clear is used to protect against dust and debris.

     

    Beam Covers
    Five different beam options and 1 black out cover allow you to take your light and turn it into 21 different lights. A Euro cover creates a flat, horizontal beam designed to light peripherals while maintaining distance. A Flood cover is used for low-speed, vertical trail flood beam lights the road to the tree tops. Wide flood is a low-speed, horizontal flood beam gives a wide blanket of light. An Elliptical beam creates distance and spread while limiting periphery lighting for driving in traffic. Spot lens is a protective clear cover that stops particulate from damaging the lights.

    $15.00

  • FEATURES

    • Transforms Light Into 20 Lights In 1
    • Change Beam Pattern In A Snap
    • Shatterproof Polycarbonate
    • Black Out Cover With Logo
    • Glow In The Dark "X"

    Colored Covers
    With four different color options each with a different specific use. Red is designed to reduce light temperature and glare back to enhance penetration in dust and air particulate. Yellow is designed for foggy conditions by reducing the amount of blue light. Blue covers increase the light distance when used in snow by reflecting the blue light off the snow. Clear is used to protect against dust and debris.

     

    Beam Covers
    Five different beam options and 1 black out cover allow you to take your light and turn it into 21 different lights. A Euro cover creates a flat, horizontal beam designed to light peripherals while maintaining distance. A Flood cover is used for low-speed, vertical trail flood beam lights the road to the tree tops. Wide flood is a low-speed, horizontal flood beam gives a wide blanket of light. An Elliptical beam creates distance and spread while limiting periphery lighting for driving in traffic. Spot lens is a protective clear cover that stops particulate from damaging the lights.

    $15.00

  • FEATURES

    • Transforms Light Into 20 Lights In 1
    • Change Beam Pattern In A Snap
    • Shatterproof Polycarbonate
    • Black Out Cover With Logo
    • Glow In The Dark "X"

    Colored Covers
    With four different color options each with a different specific use. Red is designed to reduce light temperature and glare back to enhance penetration in dust and air particulate. Yellow is designed for foggy conditions by reducing the amount of blue light. Blue covers increase the light distance when used in snow by reflecting the blue light off the snow. Clear is used to protect against dust and debris.

     

    Beam Covers
    Five different beam options and 1 black out cover allow you to take your light and turn it into 21 different lights. A Euro cover creates a flat, horizontal beam designed to light peripherals while maintaining distance. A Flood cover is used for low-speed, vertical trail flood beam lights the road to the tree tops. Wide flood is a low-speed, horizontal flood beam gives a wide blanket of light. An Elliptical beam creates distance and spread while limiting periphery lighting for driving in traffic. Spot lens is a protective clear cover that stops particulate from damaging the lights.

    $15.00

  • Features: 
    • Easy to Snap On & Off
    • Polycarbonate Plastic
    • Extra Layer of Protection

    $13.95

  • Features: 
    • Easy to Snap On & Off
    • Polycarbonate Plastic
    • Extra Layer of Protection

    $14.00

  • This 7.5' wiring harness is designed to connect a single Hi/Lo LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder and a waterproof switch. This harness is compatible with the following Rigid Industries LED Lights: D2 H/L (Single), 4'-10" E2 H/L, 6" &10" SR2 H/L and SRQ2 H/L.

    $56.99

  • Features: 
    • Stainless Steel Construction
    • Black Powder Coat Finish
    • Includes All Necessary Hardware
    • Made in the USA!

    $30.00

  • Features: 
    • Stainless Steel Construction
    • Black Powder Coat Finish
    • Includes All Necessary Hardware
    • Made in the USA!

    $28.49

  • Features: 
    • Easy to Snap On & Off
    • Polycarbonate Plastic
    • Extra Layer of Protection

    $16.00

  • Features: 
    • For D-Series Flush Mount Lights
    • 15° Horizontal Angle

    $34.19

  • Features: 
    • Stainless Steel Construction
    • Black Powder Coat Finish
    • Includes All Necessary Hardware
    • Made in the USA!

    $21.84

  • Features: 
    • Stainless Steel Hardware
    • Includes: Security Nuts/Bolts & Key

    $27.54

  • Features: 
    • 14 AWG Wire
    • Deutsch DT Connector

    $15.00
Showing 1 - 20 of 29 items