List of products by manufacturer Extreme Turbo Systems

Showing 1 - 12 of 12 items
  • $244.00

    ETS-SUB-LEG-INTAKE

    New to the ETS lineup is the 2005-2009 Subaru Legacy GT Intake. Made from 3" mandrel bent stainless steel, this 3" intake uses a K&N open element filter tucked into the passenger side fender.   Must be used with a front mount intercooler

  • $1,139.00

    ETS-400-35

    1 Review(s)

    The ETS Cat-back Exhaust for the 2015-2017 WRX/STi is built entirely in their Vancouver facility. This exhaust features a true 3.0 inch all the way through mid-pipe that connects to the rear section before splitting into two 3" pipes and finishing off with quad 3.5" titanium tips. They use V-band connections on all connections (except the factory 2 bolt)...

  • $685.00

    ETS-SUB04-TMIC

    ETS has created a high performance, direct bolt-on top-mount intercooler for the 04-07 Subaru STi. This intercooler features a large 19in x 7in x 4in core with 31 charge rows! Most intercoolers have between 24-25 charge rows. More charge rows means more heat transfer area which results in lower temperatures. This core has been specifically designed for...

  • $1,749.00

    ETS_04_STI_FMIC-TI1

    ETS has created a series of front-mount intercoolers specifically designed for the 2004-2007 Subaru STi. Each intercooler can be configured to exactly suit your needs depending on your chassis type, turbo setup, and your desired intercooler core size.This model features titanium intercooler piping.

  • $1,289.00

    ETS_04_STI_FMIC

    ETS has created a series of front-mount intercoolers specifically designed for the 2004-2007 Subaru STi. Each intercooler can be configured to exactly suit your needs depending on your chassis type, turbo setup, and your desired intercooler core size.   This model features stainless steel piping.

  • $96.00

    ETS-100-24

    The ETS Air Intake Heat Shield was developed to capture the cool air supplied to the Air Intake through the factory intake snorkel. The heat shield consists of a one piece surround, directional lid, and stainless fasteners that help reduce a loss of power that could be robbed from your motor by a heated intake charge.   Note: The Air box will not fit...

  • $289.00

    ETS-100-25

    ETS is proud to release our 2015 WRX Intake System. Our intake system utilizes a stock size MAF housing that doesn't require any retuning. You can bolt this on and notice immediate performance gains!  Air Box Sold Separately

  • $1,249.00

    ETS-400-28

    The ETS Cat-back exhaust for the 2015 WRX is a made in their facility. This exhaust features a true 3.0 all the way through mid-pipe that connects to the rear section splitting into two 3" pipes and finished off with quad 3.5" SS tips. They use V-band connections on all connections (except the factory 2 bolt) for a leak proof seal (no gaskets to blow out...

  • $1,249.00

    ETS-400-28

    The ETS Cat-back exhaust for the 2015 WRX is a made in their facility. This exhaust features a true 3.0 all the way through mid-pipe that connects to the rear section splitting into two 3" pipes and finished off with quad 3.5" SS tips. They use V-band connections on all connections (except the factory 2 bolt) for a leak proof seal (no gaskets to blow out...

  • $695.00

    ETS-400-26

    The Extreme Turbo Systems 2015 WRX High Flow Cat Down Pipe is a true 3.0" SS J-Pipe/Downpipe. It utilizes factory fitment with a rear 90 degree bung to prevent a check engine light.Features:3.0" SS Construction Mandrel Bent Factory Replacement Supports up to 750WHP (Stock turbo capabale of ~half of that) 90 Degree O2 Bung To Prevent Check...

  • $595.00

    ETS-400-25

    The Extreme Turbo Systems 2015 WRX J-Pipe/Down Pipe is a true 3.0" SS J-Pipe/Downpipe. It utilizes factory fitment with a rear 90 degree bung to prevent a check engine light.   Features:3.0" SS Construction Mandrel Bent Factory Replacement Supports up to 750WHP (Stock turbo capable of ~half of that) 90 Degree O2 Bung To Prevent Check Engine...

  • $695.00

    ETS-400-27

    The Extreme Turbo Systems 2015 WRX High Flow Cat Down Pipe is a true 3.0" SS J-Pipe/Downpipe. It utilizes factory fitment with a rear 90 degree bung to prevent a check engine light. Features:3.0" SS Construction Mandrel Bent Factory Replacement Supports up to 750WHP (Stock turbo capabale of ~half of that) 90 Degree O2 Bung To Prevent Check Engine...

Showing 1 - 12 of 12 items

Subaru Performance Parts