WHLN-W91379
Stabilize your Subaru's shifter assembly mounting base with this shifter bushing by RalliTEK.
Pairs well with:
Includes Hardware
The COBB Shifter Stop for 2015+ WRX MT is injection-molded fiberglass-reinforced nylon that allows for adjustment to achieve more precise shifting. With installation and adjustment taking mere minutes, the results are instant.
Reduce side-to-side slop of your shifter while in the 1-2 and 5-6 shifter gates. There is nearly a full inch of horizontal play to the shifter mechanism while in gear in the two outer gates (1-2 and 5-6) from the factory. This can lead to a loss of feeling and confidence in gear selection. The COBB Shifter Stop allows for independent adjustment of the two gates to significantly reduce side to side slop.
COBB Tuning is an automotive engineering company founded in Rockwall TX by Trey COBB in 1999. They are dedicated to developing solutions that improve vehicle performance and the driving experience. COBB Tuning approaches design by taking the entire vehicle-platform into account as a complete system. Their ultra-high-quality products and services are professionally engineered, thoroughly tested, and backed by industry-leading customer service to ensure that they meet their objectives and exceed customer expectations. COBB Tuning is Engineered Performance.
Add drivetrain rigidity and precision to throttle input to your Subaru with our PERRIN Performance Differential Lockdown Kit.
PERRIN bushings eliminate the sloppy feeling during quick gear changes, giving the driver a more precise feel when shifting. Especially that crucial 2nd-3rd shift.
PERRIN bushings eliminate the sloppy feeling during quick gear changes, giving the driver a more precise feel when shifting. Especially that crucial 2nd-3rd shift.
PERRIN bushings eliminate the sloppy feeling during quick gear changes, giving the driver a more precise feel when shifting. Especially that crucial 2nd-3rd shift.
PERRIN Rear shifter bushings help eliminate any loose and sloppy feel during gear changes! Give your shifter a feeling of precision not found with stock bushings!
PERRIN Rear shifter bushings help eliminate any loose and sloppy feel during gear changes! Give your shifter a feeling of precision not found with stock bushings!
Kartboy has released their rear subframe inserts for the 2008-2014 WRX. These will be inserted into the subframe voids in the OEM bushings of the 08+ impresa models. These are going to reduce subframe shock, and will increase the feedback on the rear suspension.
These Kartboy rear subframe inserts will also improve and stabilize the rear suspension geometry. Hand made in the U.S.A., and 100% guaranteed.
Whiteline’s Transmission Member Bushings replace the factory’s soft rubber bushings with more robust urethane bushings. This will result in reducing the amount of flex in the transmission support. These are going to be placed in the lateral, and the horizontal support of the transmission, and will ultimately eliminate the flex that is allowed by the soft rubber units in place.
Expect improvements in shifting, as well as in throttle response.
Replace worn suspension bushings to as new condition and appearance with Whiteline black synthetic elastomer bushings
The Whiteline Rear Diff Positive kit bushings are designed to reduce the initial torque loss and movement through the rear differential mounts during acceleration and deceleration. These inserts fill in the voids that are in the OEM bushings and help to stiffen the rear differential. They are a great upgrade for anyone looking to improve the performance of their car.
The Whiteline Rear Diff Positive kit bushings are designed to reduce the initial torque loss and movement through the rear differential mounts during acceleration and deceleration. These inserts fill in the voids that are in the OEM bushings and help to stiffen the rear differential. They are a great upgrade for anyone looking to improve the performance of their car.
These bushings replace the stock bushings in the piece that mounts the stock rear diff mount to the rear diff cross member. The stock bushings have quite a bit of free play allowing the rear diff to move around under aggressive driving conditions. This movement will often heard through a loud clunk coming from the rear end under hard shifts. You will notice better throttle response and a more connected feeling to your vehicle.
The Whiteline low compliance synthetic elastomer bushing simply inserts into the factory transmission / gearbox mount with immediate increase of positive shift feel through reduction in compliance of the heavily voided factory mount.
These bushings replace the stock bushings in the rear diff support outrigger position. The stock bushings have quite a bit of free play allowing the rear diff to move around under aggressive driving conditions. This movement will often heard through a loud clunk coming from the rear end under hard shifts. You will notice better throttle response and a more connected feeling to your vehicle.
The Whiteline Rear Differential Positive Power Kit Inserts are inserts to the rear differential bushings. These are not factory replacement bushings, these are designed to fill in the voids of the factory bushings so you don’t have to press the factory bushings out. The job of the Whiteline Rear Diff Positive Power Kit is to secure the rear diff in its cradle within the subframe.
Manual XV's only!
If you are experiencing rear clunk of your 2002-2007 WRX/STI, you may want to consider a set of Kartboy rear diff crossmember bushings! You will notice improvements on acceleration, deceleration, and these are made out of hard urethane that will reduce deflection and absorb more shock.
These Kartboy bushings are hand made in the U.S.A., and are guaranteed.
That Kartboy Transmission Mount Insert installs easily into the void in the factory mount giving you an instant change in shift feel.
Features:
The Kartboy Front Shifter Bushings replace the stock shifter mount bushings. While this product will not change the geometry of the shifting mechanism, it eliminates excessive play in the system for a more solid gear change. This simple modification will make your shifter linkage feel 10x more solid. This product requires jacking of the car and jackstands are mandatory. Can be installed in 30 min and are accessible from underneath the car. The Polyurethane material is Grey for the STI.