Pods

Gauge Pods for your Subaru's performance applications.

Pods

Gauge Pods for your Subaru's performance applications.

Showing 1 - 20 of 28 items
  • SMY Clustermaker has been designed to provide users with another option to safely mount the Cobb AccessPort AP3. 

    Saab
    Subaru
  • This insert is for you guys that only have 1 gauge in your SMY ClusterMaker Pod. This insert matches the color and texture of the pod to create a seamless look in your car.

    SOLD INDIVIDUALLY

    Saab
    Subaru
  • The ATI ePod Steering column gauge pod is a great way to display your gauges without cluttering up your dash board. Similar color as the factory dash and does not require any drilling or modification for fitment. Gauge cups rotate for easy adjustment and to set them exactly where they need to be.

    Don't forget to choose a gauge size.

    Subaru
  • ATI introduces their dual 52mm gauge pod cluster bezel for the WRX / STI. This is a direct fit replacement for the factory cluster bezel and comes pre-textured to blend into the factory dash. With its sleek design, this gauge cluster bezel will blend in with your interior for that factory look. Bezel comes in unpainted black finish.

    Subaru
  • The ATI eZ Pod for the BRZ/FR-S is a great solution for mounting gauges. The Triple Meter Pod is a direct replacement for the passenger side dash trim piece on any/all of the aforementioned models, and as such, requires almost minimal install time and expertise. The Triple Meter Pod was designed to accommodate three standard 60mm gauges of the drivers' choice all of which are angled conveniently toward driver - or three, standard 52mm gauges with ATI's conversion pieces. The BRZ-FR-S Triple Meter Pod is made of Injection Molded ABS Plastic and will be available in two finishes; a sprayed flat finish, and a softer, felt-like finish.

    Scion
    Subaru
  • With an ever increasing challenge in integrating gauges into well designed interiors, the vPod essentially keeps the interior unaltered by integrating gauges in the ventilation system. They blend in seamlessly.

    Features:

    • Each vent design is specific to a vehicle 
    • Pod insert for OEM vent housing 
    • Precision injection molded plastic for precise and consistent production 
    • Color and texture matched 
    • Angled design towards driver provides best possible viewing angle 
    • High impact ABS plastic 
    • Quality fit and finish

     

    Scion
    Subaru
  • ATI 2008-2010 Impreza gauge cluster is a direct factory fit allowing you to mount 3 gauges. 

    The ATI Right Side gauge pod incorporates 3 60mm or 52mm gauges. Pod is cast to the same color and texture as the factory dash board. The Gauge pod installs with a 3M Pad and includes all necessary hardware for installation. Making this an ideal gauge holder for someone wanting a clean and OEM look. 

    Mounted quickly and easily through the use of double sided adhesive but can also be screwed down with the included screws if preferred.

    This pod is for offroad use only as it covers the passenger side airbag.

    Subaru
  • The ATI Faceplate is meant to fit into the ATI Subaru WRX / STI Center Gauge Pod. Has 4 snaps on back to allow faceplate to snap into pod without customization or modification. Available in Blue, Carbon Fiber Look, or Chrome.

    Subaru
  • These rings allows ATI ePods to convert 60mm gauges cups to handle 52mm gauges.

    Mitsubishi
    Nissan
    Saab
    Scion
    Subaru
  • The ATI eZ Pod for the BRZ/FR-S is a great solution for mounting gauges. The Triple Meter Pod is a direct replacement for the passenger side dash trim piece on any/all of the aforementioned models, and as such, requires almost minimal install time and expertise. The Triple Meter Pod was designed to accommodate three standard 60mm gauges of the drivers' choice all of which are angled conveniently toward driver - or three, standard 52mm gauges with ATI's conversion pieces. The BRZ-FR-S Triple Meter Pod is made of Injection Molded ABS Plastic and will be available in two finishes; a sprayed flat finish, and a softer, felt-like finish.

    Scion
    Subaru
  • The ATI Faceplate is meant to fit into the ATI Subaru WRX / STI Center Gauge Pod. Has 4 snaps on back to allow faceplate to snap into pod without customization or modification. Available in Blue, Carbon Fiber Look, or Chrome.

    Subaru
  • The ATI gauge pod will hold either 52mm or 60mm gauges. The pod comes pre-textured and colored to match the factory dash color. No painting is required. Out of the box it will hold 60mm gauges. All that is required for it to hold 52mm gauges is to use step down rings.

    Gauges with longer bodies may need to use the supplied 10mm ring spacers for proper fitment.

    This pod attaches directly to the stock clock pod using supplied double sided tape and screws and is intended for LHD vehicles only.

    Subaru
  • These rings allows ATI ePods to convert 60mm gauges cups to handle 52mm gauges.

    Mitsubishi
    Nissan
    Saab
    Scion
    Subaru
  • The ATI gauge pod will hold either 52mm or 60mm gauges. The pod comes colored to match the factory dash color. No painting is required. Out of the box, it will hold 52mm gauges. All that is required for it to hold 60mm gauges is to remove a perforated ring. 

    Mfgr. Warranty:1 year
    Attachment Method:OEM Replacement
    Gauge Size (mm):52mm and 60mm
    Material:Plastic
    Pod Color:Black

    Subaru
  • The Autometer A-Pillar pod holds three 2 1/16" gauges. The pod fits over the factory a-pillar. Includes push snaps to install and lock in place. Comes cast in gloss black, surface is able to be painted. This gauge pod Does not fit WRX Wagon. Sedan Only.

     

    Mfgr. Warranty:1 year
    Attachment Method:Hardware
    Gauge Size (mm):52mm
    Material:Plastic
    Pod Color:Black


    Subaru
  • The Autometer Center Gauge Pod holds three 2 1/16" gauges. Fits into the area where the factory clock is. It is cast in black, so you will need to paint to match the factory dash color.

    Attachment Method:OEM Replacement
    Gauge Size (mm):52mm
    Material:Plastic
    Pod Color:Black

    Subaru
  • The Autometer A-Pillar pod holds two 2 1/16" gauges. The pod fits over the factory a-pillar. Includes push snaps to install and lock in place. Comes cast in gloss black, surface is able to be painted. This gauge pod Does not fit WRX Wagon. Sedan Only.

    Attachment Method:Hardware
    Gauge Size (mm):52mm
    Material:Plastic
    Pod Color:Black

    Subaru
  • This SMY ClusterMaker Gauge Pod is a dual 52mm gauge setup that replaces the factory cluster bezel. Made with injection molded ABS plastic it is stronger than the OEM piece it replaces but it matches it perfectly in terms of the texture you can see. It looks so good you would think Subaru themselves made it. 

    Each pod comes with rubber bands specially sized to fit your gauges nice and tight in the pods. 

    This is unconfirmed to fit RHD cars.

    Subaru
  • This SMY ClusterMaker Gauge Pod is a dual 52mm gauge setup that replaces the factory cluster bezel. Made with injection molded ABS plastic it is stronger than the OEM piece it replaces but it matches it perfectly in terms of the texture you can see. It looks so good you would think Subaru themselves made it.

    Each pod comes with rubber bands specially sized to fit your gauges nice and tight in the pods.

    Subaru
Showing 1 - 20 of 28 items