Blouch Dominator 1.5XT-R 8cm^2 Ceramic Coated 3in Inlet Turbo - WRX 2002-2007 / STI 2004-2016 / Forester XT 2004-2007
Investing in a larger turbo and supporting mods is one of the best power upgrades you can buy. Blouch is the leader in turbo development, consistently building some of the best turbos. This new XT-R turbo from Blouch includes a billet compressor wheel to optimize the aerodynamics of the turbo and to increase compressor flow within the same inducer geometry.
The billet compressor wheel combined with a Garrett GT turbine and full ball-bearing technology produce a complete bolt-on package that includes a stainless steel turbo oil feed line, a steel oil drain tube, and coolant lines. An adjustable actuator is standard issue on the 1.5XT-R and is pre-calibrated to operate at 15 PSI unless otherwise specified. The 1.5XT-R has a 56mm turbine to promote better spool up and results in a better overall turbo.
With the 8cm2 housing, this turbo will spool up slightly faster than the 10cm2 version of the 1.5XT-R. With the faster spool comes a slight loss in the top end.
|Bearing Type:||Ball Bearing|
|Exhaust Housing Size:||8cm|
|Oil Line Included:||Yes|
|Ported Turbine Housing:||Yes|
|Mfgr. Warranty:||6 months / 6,000 miles|
No customer comments for the moment.