Forced Performance HTA71 Internal WG Turbine Housing - WRX 2002-2007 / STI 2004-2017 / Forester XT 2004-2007
Forced Performance Turbochargers
The FP 71HTA™ turbocharger for the Subaru WRX/STI features the 71mm HTA™ compressor section with your choice of 58MM stock appearing cover or 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2turbine section. This combo produces the fastest spool and transient response possible in any Subaru-based turbocharger. The FP 71HTA™ flows 51 lbs per minute and is capable of producing upwards of 425WHP.
Oil Supply Line now included!
Please read below to determine which oil line fits your application.
We offer two different types of oil lines that will fit most WRX/STI year models. However due to part number changes year to year and make to make we can not solidly identify which line you need. So below is a description of the lines and instructions on how to determine which one you'll need for your application. These are not made to work on anything other than Impreza WRX/STIs and we do not know if they will work on other models such as Legacy and Outbacks.
Type 1 - This line is to be used if the oil feed location off the back of the head only feeds the turbo. See the diagram on the right below, if you have that type of oil line you will use the Type 1 line. This is formally known as a non-AVCS line.
Type 2 - This line is to be used if the oil feed location off the head splits and feeds the turbo and the AVCS solenoid. See the diagram on the left below, if you have that type of oil line you will use the Type 2 line. This is formally known as an AVCS Line.
Porting is also available for this turbo.
For all of our journal bearing turbos we recommend a high quality oil see below for our oiling information sheet.
Free Subaru Gasket set with purchase of turbo!
No customer comments for the moment.