Forced Performance HTA71 Internal WG Turbine Housing - WRX 2002-2007 / STI 2004-2016 / Forester XT 2004-2007

New

Forced Performance Turbochargers

The FP 71HTA™ turbocharger for the Subaru WRX/STI features the 71mm HTA™ compressor section with your choice of 58MM stock appearing cover or 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2 turbine section. This combo produces the fastest spool and transient response possible in any Subaru based turbocharger. The FP 71HTA™flows 51LB a minute capable or producing upwards of 425WHP.

More details

$949.00

Oil Supply Line now included!

Subaru 71HTA

  • Compressor wheel - 71HTA
  • Flow rating - 51LB per minute
  • CW Measurements - 51.2MM Inducer / 68MM Exducer
  • TW Measurements - 60.8MM Inducer / 54MM Exducer
  • Compressor Housing - 84MM FAP Cover or 58MM Stock Appearing Cover
  • Turbine Housing - FP 8CM Subaru Turbine Housing
  • CHRA - FP Journal Bearing
  • Oil Line - Included

Please read below to determine which oil line fits your application.

We offer two different types of oil lines that will fit most WRX/STI year models. However due to part number changes year to year and make to make we can not solidly identify which line you need. So below is a description of the lines and instructions on how to determine which one you'll need for your application. These are not made to work on anything other than Impreza WRX/STIs and we do not know if they will work on other models such as Legacy and Outbacks.

Type 1 - This line is to be used if at the oil feed location off the back of the head only feeds the turbo. See the diagram on the right below, if you have that type of oil line you will use the Type 1 line. This was formally known as an non-AVCS line.

Type 2 - This line is to be used if at the oil feed location off the head splits and feeds the turbo and the AVCS solenoid. See the diagram on the left below, if you have that type of oil line you will use Type 2 line. This was formally known as the AVCS Line.

 

Porting is available again for this turbocharger. Please take a look at our Porting Services page for examples:

For all of our journal bearing turbos we recommend a high quality oil see below for our oiling information sheet.

Forced Performance Oiling Recommendations.

Free Subaru Gasket set with purchase of turbo!

No customer comments for the moment.

Write a review

Forced Performance HTA71 Internal WG Turbine Housing - WRX 2002-2007 / STI 2004-2016 / Forester XT 2004-2007

Forced Performance HTA71 Internal WG Turbine Housing - WRX 2002-2007 / STI 2004-2016 / Forester XT 2004-2007

The FP 71HTA™ turbocharger for the Subaru WRX/STI features the 71mm HTA™ compressor section with your choice of 58MM stock appearing cover or 84MM Flow Advancement Port™ compressor cover coupled to the 8cm2 turbine section. This combo produces the fastest spool and transient response possible in any Subaru based turbocharger. The FP 71HTA™flows 51LB a minute capable or producing upwards of 425WHP.

Write a review

only logged users can upload product photos click here to login

Subaru Performance Parts