RalliTEK 1.375" Rear Raised Overload Springs & Rear Spacer Kit - Outback 2005-2009

RTEK-830-523-355 & 830-524-001

New

RalliTEK

RalliTEK developed these REAR overload springs to help eliminate some of the "sagginess" out of the rear end when loaded. It comes included with our rear 1" lift kit spacers & hardware.


Includes 1" Rear Lift Kit Spacers


  • Spring Lift: 3/8" LIFT
  • Spacer Lift: 1" LIFT
  • Net Lift: 1 3/8" LIFT
  • Spring Rate: 355 lb/in

PRICE IS PER PAIR OF SPRINGS.

More details

$275.00

Tested and Backed by RalliTek

The Subaru Outback is a rugged, yet versatile vehicle. They are used to gather groceries from the local market or strictly as a tool to get the world's most adventurous people to their sometimes hard to reach destination of choice. Either way, people trust their Subaru Outback to take them there. 

 

RalliTEK has developed the rear overload springs to help eliminate some of the "sagginess" out of the rear end when loaded with groceries or cargo. We've noticed that even when the car is unloaded, upon acceleration, the Subaru Outback tends to dive down in the rear due to its softer OE springs.

 

This overload spring maintains proper ground clearance, suspension alignment, and headlight throw as you carry heavy loads or tow a small utility trailer. RalliTEK designed these springs about 18% stiffer than OE for improved performance while maintaining ride quality.

 

RalliTEK overload springs are a direct replacement for OE springs. If find yourself overloading the cargo area of your Outback and wish you could maintain the ride height, try out RalliTEk overload springs!

 

Note: RalliTEK does not recommend using overload springs with any upgraded rear sway bar unless you also upgrade the front suspension of your vehicle too as to avoid causing increased oversteering. Do not pair with legacy struts.


Dont forget the fronts!

RalliTEK Front Raised Springs - Outback 2005-2009


Grade 
Lucas H 12/20/2016

Best upgrade yet

Got these for my saggy and bouncing rear end on my 05 outback. I only used 1/2 the spacer to pick up the back just a bit. Between these springs and new struts the car has never rode better. Its everything I wanted it to be. Its like a new car, much more like my baja was in the back. I haven't done the front yet but when I do I will be getting overload springs there too. Back wore out faster due to pulling light trailer, which this definitely helps with too.

    Grade 
    Brett S 07/24/2015

    Helped a lot!

    After installing these rear overload springs my outback stiffened up in the corners and didn't sag as much when I loaded it down with cargo!

    • 2 out of 2 people found this review useful.

    Write a review

    RalliTEK 1.375" Rear Raised Overload Springs & Rear Spacer Kit - Outback 2005-2009

    RalliTEK 1.375" Rear Raised Overload Springs & Rear Spacer Kit - Outback 2005-2009

    RalliTEK developed these REAR overload springs to help eliminate some of the "sagginess" out of the rear end when loaded. It comes included with our rear 1" lift kit spacers & hardware.


    Includes 1" Rear Lift Kit Spacers


    • Spring Lift: 3/8" LIFT
    • Spacer Lift: 1" LIFT
    • Net Lift: 1 3/8" LIFT
    • Spring Rate: 355 lb/in

    PRICE IS PER PAIR OF SPRINGS.

    Write a review

    Subaru Performance Parts