Skip to product information
1 of 3

Tomei

Tomei Expreme Ti Titanium Catback Exhaust Type 80 - Fits Subaru BRZ 2013-2022 - FR-S 2013-2016

Tomei Expreme Ti Titanium Catback Exhaust Type 80 - Fits Subaru BRZ 2013-2022 - FR-S 2013-2016

SKU:TOME-TB6090-SB03C

Regular price $1,190.00 USD
Regular price Sale price $1,190.00 USD
Sale Sold out
Shipping calculated at checkout.

The Tomei Type 80 Expreme Titanium Cat-Back Exhaust System has undergone a new revolutionary design to reduce weight and increase performance and horsepower. The new design has been fully fabricated using lightweight titanium to weigh 7.3 kg (16.1lbs) and with minimal bends, reducing exhaust turbulence under acceleration while improving throttle response, horsepower, and torque.


Intended to become the direct factory exhaust system replacement, the exhaust hangers have been positioned to pair with OEM locations so, there is no need for additional modifications.

Included:

  • Additional Exhaust Hangers
  • Gaskets, Clamps, and Mounting Hardware


The Tomei Type 80 Expreme Titanium Cat-Back Exhaust System is a single exit style exhaust, providing that aggressive tone under acceleration and idle while remaining suitable for forced induction and those that wish a naturally aspirated form.


Specifications:

  • Brand: Tomei
  • Installation Hardware Included: Yes
  • Piping Coating: No
  • Piping Flex Joint: No
  • Piping ID: 80mm
  • Piping Material: Titanium
  • Piping Taper: No
  • Silencer Included: Yes
  • Tip Material: Titanium
  • Tip Qty: 1
  • Tip Shape: Round
  • Tip Size: 115mm
  • Exit Side: Left

Tomei starts with the very best in raw materials and takes it to the next level. This exhaust is about one thing and one thing only; performance. They have started by stripping the weight down to what feels like nothing compared to the stock exhaust. They did this by using titanium over steel and making the exhaust as straight as possible. Fewer bends mean fewer materials used. They even went so far as to think about the extra weight regular style flanges add, so they went ahead and went with a weight saving spring and clamp setup. 

So not only do you get the performance you expect from a Tomei product, you get the bragging rights too. 

This design is suited for vehicles that are running a forced induction (Turbos or Superchargers) setup. With the main focus being maximum exhaust flow efficiency, this design is primarily focused on maximum weight reduction and for best overall performance gains.

Brand: Tomei
Exhaust Orientation: Angled Exit
Installation Hardware Included: Yes
Piping Coating: No
Piping Flex Joint: No
Piping ID: 80mm
Piping Material: Titanium
Piping Taper: No
Silencer Included: Yes
Tip Material: Titanium
Tip Qty: 1
Tip Shape: Round
Tip Size: 115mm
Exit Side: Left
Mfgr. Warranty: No Warranty
View full details

Collapsible content

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Scion FR-S Base - 2013
Scion FR-S Base - 2014
Scion FR-S Base - 2015
Scion FR-S Base - 2016
Subaru BRZ Base - 2013
Subaru BRZ Base - 2014
Subaru BRZ Base - 2015
Subaru BRZ Base - 2016
Subaru BRZ Base - 2017
Subaru BRZ Base - 2018
Subaru BRZ Base - 2019
Subaru BRZ Base - 2020
Subaru BRZ Base - 2021
Subaru BRZ Base - 2022

Frequently Purchased Together