RalliTEK 4EAT Transmission Mount Insert Bushing

New

RalliTEK

  • A transmission mount upgrade for your automatic equipped Subaru.
  • Improved shift feel and enhanced response.
  • Installs in your factory transmission mount.

More details

$44.99

Tested and Backed by RalliTek

Add to my wishlist

RalliTEK 4EAT Transmission Mount Insert Bushing installs in your factory transmission mount. RalliTEK 4EAT Trans Mount Insert provides improved shift feel and response. This bushing will insert into your factory trans mount and remove excess drivetrain movement caused by soft and/or aging rubber in your factory mount.

Designed specifically for the smaller mount made for Subaru 4 speed automatic transmissions. Requires removal of factory mount from vehicle. Bushing insert installs best with a bench vice. Install instructions are included. Usually takes less than one hour to install from start to finish

RalliTEKoffers two versions of this insert. One is soft for every day street driving, seconds is hard for track use. You can use the harder insert for every day driving, but be aware it will contribute to a bit more drivetrain noise than our softer version!

Note: This only works with the one piece tranmission mouts. Some Subaru applications have a two peice style mount.

Note: This kit only includes the insert, not the transmission mount.

Grade 
Jeffrey B 10/10/2015

2004 Subaru Forester XT

I installed this with a friend with four jack stands - two jacks and a couple beers. Even with messing around we got the car up and everything out and back in, in under an 2 hours. We did have to shimmy the cross member out because of my 3 inch exhaust but it still came out without removing it. Once it was out i used the supplied grease and a table vise and it went right in. That took all of 3 minutes. Key is keeping the bushing and the mount aligned. Extra hands come in handy! ;p

I bought the hard mount because I have already gone through one trans and didn't want to mess around with stuff moving around under a heavy load. With that said I have a full exhaust and UEL headers. I can feel and hear the trans slightly. The exhaust still drowns out any extra noise this thing adds and for the piece of mind knowing its down there doing its job i honestly wouldn't mind if it made tons of noise. I hope to add more stuff from RalliTEK in the future because the fit and quality is second to none.

Thanks RalliTEK!

Jeff B. - Fozmafia

  • 1 out of 1 people found this review useful.

Write a review

RalliTEK 4EAT Transmission Mount Insert Bushing

RalliTEK 4EAT Transmission Mount Insert Bushing

  • A transmission mount upgrade for your automatic equipped Subaru.
  • Improved shift feel and enhanced response.
  • Installs in your factory transmission mount.

Write a review

only logged users can upload product photos click here to login

Subaru Performance Parts