AEM DryFlow Air Filter - 9" Element
|This product is universal or does not fit your vehicle. Please verify fitment before purchase!|
Availability date: 09/19/2013
These AEM Dry Flow filters are the best filters we at RalliTEK have ever used. We have seen significant gains from just replacing the filter on many cars with just about any intake system.
AEM DRYFLOW air filters do not use oil so there is no chance of over-oiling your filter which takes the guesswork out of servicing.
Easy to Clean
The DRYFLOW filter uses environmentally friendly, mild, all-purpose cleaner. Simple cleaning instructions. Under extremely dusty/dirty conditions, DRYFLOW filters can be knocked a few times to remove excess dirt off of the filter pleats. DRYFLOW filter media is so durable that it can withstand almost unlimited cleanings and also resists water absorption. Warranty-Safe Filtration
DRYFLOW air filters will not void your warranty.
Sheds Dirt Under Vibration
AEM?s unique non-woven filter media does not require oil to filter and trap dirt and contaminants, and as a result an open air filter actually sheds dirt under engine vibration, unlike cotton-gauze which holds on to contaminants until you clean the filter.
Air Flow Capabilities
Every DRYFLOW air filter is engineered to exceed the normal flow capacities of the engine it is required for when clean. For example, a typical naturally aspirated 2.0L engine requires 253 CFM of flow. The filter we manufacture for a 2.0L Acura RSX Type-S (21-204DK) delivers up to 565 CFM of flow when clean. You get great flow with DRYFLOW, in addition to outstanding filtration and excellent dust holding capacity.
Many of our competitors emphasize flow as a primary means of power production in air intakes. While flow is certainly an important part of the equation, we find that tuning the inlet to work with the harmonics of the engine produces the best power gains. We address flow in the sense that the engine requires a given amount of flow, so we calculate our filter size to exceed this flow requirement by a wide margin to accommodate potential future engine modifications. This allows us to retain a high level of filtration efficiency and still exceed the flow requirements of an engine. Our filters will trap more dirt, and consequently extend the life of the rings and seals in your engine.
By designing our DRYFLOW filters to exceed the flow requirements for the size of the engine that we designed the intake for, it allows us to do two things. The first is that it allows you to add modifications that increase flow demand without exceeding the flow capabilities of the filter. Second, it extends the filter?s service cycle (you don?t have to clean it as often) because it can trap more dirt without sacrificing flow. Rest assured that we have taken flow into account for all of our intake designs and our DRYFLOW filters will deliver more than adequate flow for your vehicle.
** All flow testing was conducted by AEM on a Superflow 1060 Super Bench flow bench. Results are single filter comparisons and will vary for other part numbers.
No customer comments for the moment.