Mishimoto Front Mount Intercooler Kit - WRX 2015-2017

New

Mishimoto

Here at Mishimoto, we've decided to expand our line of 2015 WRX parts. Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015 WRX Front-Mount Intercooler Kit will provide your 2015 WRX with the ability to make the most horsepower and torque possible. This 2015 WRX front-mount intercooler was designed with a large 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time.

Gold and sometimes Silver require a special order from Mishimoto.

More details

$1,096.00

The Mishimoto 2015 WRX front-mount intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

The Mishimoto Subaru WRX Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving your car an instant response without the excessive throttle lag that plagues many front-mount intercooler designs. The hot-side pipe also features a CNC-machined flange for a leak free connection to the turbo. The cold side of the system features 2.5" to 2.75" mandrel-bent aluminum tubing for maximum airflow and to match the diameter of your throttle body.

This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler. The kit includes all necessary mounting brackets, including a new bracket for the air intake. Our 2015 WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and complements the Mishimoto Subaru WRX Performance Air Intake for added cooling power.

Mishimoto tested this intercooler on our Stage 2 265 whp 2015 WRX to find significant drops in AITs (air intake temperatures), and it has also been flow tested to over 600 whp! The 2015 WRX front-mount intercooler is available with either a Sleek Silver or Stealth Black cooler and, like all our 2015 WRX parts, includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

Worried that paint reduces performance? Check out our Painted Intercooler Engineering Report to learn how we debunked that myth!

COOLER OVERALL SIZE
37.7" x 8.6" x 5.4"

COOLER CORE SIZE 
28" x 8.05" x 3.5"

COOLER CONSTRUCTION
Bar-and-plate with cast end tanks

COOLER TANK WALL THICKNESS
3.5mm

COOLER INLET/OUTLET
2.45" I.D. / 2.75" O.D.

HOT-SIDE INTERCOOLER PIPE SPECS 
–Made from Polished Mandrel-Bent Aluminum 
–2.25" I.D. 
–Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo
–Includes Two Lower Intercooler Pipes

COLD-SIDE INTERCOOLER PIPE SPECS 
–Made from Polished Mandrel-Bent Aluminum 
–2.5" & 2.75" I.D. Pipes
–Includes Upper and Lower Intercooler Pipes

PURCHASE INCLUDES 
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/Mounting Hardware
(2) Hot-Side Intercooler Pipes
(2) Cold-Side Intercooler Pipes
(1) Air Intake Bracket 
(1) 2.25" 45° Coupler
(1) 2.25" to 2.75" 45° Transition Coupler
(1) 2.5" to 2.75" 55° Transition Coupler
(1) 2.5" to 2.75" 65° Transition Coupler 
(1) 2.75" Straight Coupler 
(2) BPV Hoses
(1) BPV Vacuum Hose
(1) CCV Hose*
(1) 30–45mm Worm-Gear Clamp
(2) 1.75" T-Bolt Clamps
(3) 2.5" T-Bolt Clamps
(2) 2.75" T-Bolt Clamps
(5) 3" T-Bolt Clamps
Mishimoto Lifetime Warranty
CRASH BAR SPECS
Steel Construction with Black Powder Coat
Application-Specific Mounting Holes

CHASSIS CODES
VA

ENGINE CODES
FA20DIT

FITS
15+ Subaru WRX

NOTE
Mishimoto recommends that this intercooler kit, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.

This kit is rated for approximately 600 whp during normal operating conditions. Maximum horsepower potential will be near 700 whp. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.

Included CCV Hose is only necessary for installation if you are using the stock hose.

INSTALLATION TORQUE SPECS
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ WRX OIL COOLER KIT

 

No customer comments for the moment.

Write a review

Mishimoto Front Mount Intercooler Kit - WRX 2015-2017

Mishimoto Front Mount Intercooler Kit - WRX 2015-2017

Here at Mishimoto, we've decided to expand our line of 2015 WRX parts. Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015 WRX Front-Mount Intercooler Kit will provide your 2015 WRX with the ability to make the most horsepower and torque possible. This 2015 WRX front-mount intercooler was designed with a large 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time.

Gold and sometimes Silver require a special order from Mishimoto.

Write a review

only logged users can upload product photos click here to login

Subaru Performance Parts