List of products by manufacturer Beatrush

Showing 1 - 20 of 26 items
  • $182.00

    BEAT-S76400MTD-SS

    The Beatrush rear member spacer set will fit on the upper and lower side of the OEM rear member bushings to increase traction and suspension performance. Compared with changing the rear member bushings, the Beatrush rear member spacers are a simple installation and far more economical.

  • $119.00

    BEAT-S76024MTD-RB

    The Beatrush Rear Differential Mount Bushings, for the 2015 Subaru WRX/STI, adds support for the rear differential through the use of an additional urethane bushing and aluminum spacer mount. The urethane bushing slips on top of the OEM bushing and the aluminum spacer sandwiches the bushings to the diff mount to prevent unnecessary differential movement.

  • $159.00

    BEAT-S76024MTD-SS

    The Beatrush rear member spacer set will fit on the upper and lower side of the OEM rear member bushings to increase traction and suspension performance. Compared with changing the rear member bushings, the Beatrush rear member spacers are a simple installation and far more economical.

  • $138.00

    BEAT-S106400TF-FS

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $161.00

    BEAT-S106024TF-RSA

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $168.00

    BEAT-S106024TF-FS

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $138.00

    BEAT-S106024TF-RSA

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $138.00

    BEAT-S106024TF-FS

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $168.00

    BEAT-S106020TF-RS

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $168.00

    BEAT-S106020TF-FS

    A screw-on tow hook that is great for track use or just to add a bit of style to your ride. Installation simply requires screwing it in to your rear bumper beam where the factory tow hook is located.  Allen key is included.

  • $249.00

    BEAT-S86010PB-C

    Even the most powerful car cannot perform at a high level without sufficient body rigidity. The Beatrush Performance Bar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction. Also preventing chassis distortion (Chassis distortion will...

  • $336.00

    BEAT-S86024PB-FT

    Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Front Frame End Brace replaces the front bumper beam with a lighter and stronger equivalent. Made using heavy duty steel mounts and tied together will a hollow d-shapped aluminum bar, this brace is much lighter and retains tow hook usability.

  • $299.00

    BEAT-S86024PB-FA

    Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Front Cross Member Performance Brace restrains the front suspension arms to the front subframe to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction.

  • $240.00

    BEAT-S86024PB-RA

    Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Rear Frame End Brace replaces the rear bumper beam with a lighter and stronger equivalent. Made using heavy duty steel mounts and tied together will a hollow d-shapped aluminum bar, this brace is much lighter and retains tow hook usability.

  • $219.00

    BEAT-S86024PB-RB

    Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Rear Member Performance Brace supports the rear suspension arms to the vehicles frame to enhance rigidity, which make the suspension movement smooth and enhances response as well as traction.

  • $274.56

    BEAT-S86016-FTA

    The Beatrush Front Strut Tower Bar is a lightweight and rigid aluminum brace. It connects both the strut towers to reduce chassis flex.Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit this strut tower bar depending on your make and model.

  • $171.00

    BEAT-S86024-RTA

    The Beatrush Rear Strut Tower Bar is a lightweight and rigid aluminum brace. It connects from each strut tower top hat to help link both sides of the chassis all together as one.This strut tower bar will fit sedans only, and will not fit in the wagon.Slight modification of AC lines, top mount intercoolers, and more, may be required to properly fit...

  • $228.00

    BEAT-S86103-FTA

    The Beatrush Strut Brace enhances body rigidity and prevents chassis flex at the front suspension mounting points. This helps increase suspension feedback, and keep the mounting points from moving which in turn helps keep the car more planted to the ground.    On 2008+ Impreza cars these will not fit with the stock struts. Coilovers MUST be used....

  • $271.70

    BEAT-S86016-RTA

    The Beatrush Rear Strut Tower Bar is a lightweight and rigid aluminum brace. It connects from each strut tower top hat to help link both sides of the chassis all together as one.   This strut tower bar will fit sedans only, and will not fit in the wagon.Slight modification of AC lines, top mount intercoolers, and more, may be required to properly...

  • $215.00

    BEAT-S86400-FTA

    The Beatrush Strut Brace enhances body rigidity and prevents chassis flex at the front suspension mounting points. This helps increase suspension feedback, and keeps the mounting points from moving which in turn helps keep the car more planted to the ground.   Slight modification of AC lines, top mount intercoolers, and more, may be required to properly...

Showing 1 - 20 of 26 items

Subaru Performance Parts